Originally Posted by focusmcfly
Some may have seen my post about the engine taking a dump on my 2.0 2000 spi focus. I decided I want to try and rebuild the engine myself. I might as well since its apart and out. I found the pistons online for under $200 and the head rebuilt with a 2 year warranty on ebay for about $300. I need to know a few things before proceeding.
1. How do you press the rods off and new pistons on ?
2. How much torque do I use when attaching the rod and bearing back on the crank? (Is there anything else I should know here as well)
3. Do I need new bearings?
4. If the cylinders look in good shape do I have to hone them?
5. Is it even wise to attempt a rebuild without experience?
Engine had less than 80,000 miles on it before valve seat fell and killed everything.
Thats about it. I have worked on cars doing various things over the years. But have never attempted a rebuild.
2 TORQUE SPECIFICATIONS
CONNECTING ROD BEARING CAP NUTS
MAIN BEARING CAP BOLTS
just a little more information on the block its self