Focus Fanatics - View Single Post - Engine rebuild on SPI ?
View Single Post
Old 11-06-2008, 06:54 PM   #13
jeffescortlx
Focus Addict
 
Join Date: Oct 2005
Fan#: 28343
Location: MN
What I Drive: Turbo Escort

Posts: 818
FF Reputation: 6 jeffescortlx Good Standing Member
Buy-Sell-Trade Rating: (0)
Quote:
Originally Posted by FocusPilot View Post
Agreed.. however some escort owners use the focus shortblock which is a direct bolt in as far as I know.
I dont know of any Escort owners that have used the Focus SPI Block, head yes, but block no. I dont think there is mounting pad on the back of the focus block since the foci uses the head for mounting.




Quote:
Originally Posted by FocusPilot View Post
I'm sure this is possible but it would not be easy and would probably set off all kinds of CEL's. Hats off to you for making it work with your 1.9 ecu.
yeah there would be a CEL since there is no IMRC, and the Cam sensor timing signal might be off, forcing the ECU to fire the injectors in batch mode, not the end of the world.
But if I could save about $1000 only to have a CEL on I would. Plus no worry of valve seat droppage. That if I dont have to pass emmition inspections.
__________________
1.9 SPI 93 Ford Escort
212whp 262tq <-outdated #'s.
And with stock 1-7/8" Exhaust.
Currently full 3" and e85.
jeffescortlx is offline  
    Reply With Quote