Ford Focus Forum, Ford Focus ST Forum, Ford Focus RS Forum - View Single Post - Engine rebuild on SPI ?
View Single Post
Old 11-06-2008, 02:02 PM   #11
jeffescortlx
Focus Addict
 
Join Date: Oct 2005
Fan#: 28343
Location: MN
What I Drive: Turbo Escort

Posts: 818
FF Reputation: 6 jeffescortlx Good Standing Member
Buy-Sell-Trade Rating: (0)
Quote:
Originally Posted by FocusPilot View Post
There is a shortage of focus spi long blocks because of the valve seat problem
The older CVH's, 1.9's also have the same problem, but it did'nt start showing up as much untill later year's like 96, just so happen when EGR became the norm. But it does seem worse in the Foci for some reason.

Quote:
Originally Posted by FocusPilot View Post
and escort owners upgrading to the 2.0.
When the Escort owners swap out there 1.9 for the 2.0, they use the Escort SPI and not the Focus SPI. The Escort SPI is a drop in and go, while the Focus SPI has some differences making it a harder swap. So we cant be blamed for the shortage :P

I guess my point is I'm spoiled, I've bought 2 2.0 SPI's for around $300, a Zetec with low miles for $275 and a SPI head from a U-Pull for $30.

And it might be possible to run a Zetec off the SPI ECU and harness. After all, I made a Zetec run off a 1992 1.9 ECU and harness. Ran pretty damn good to.
__________________
1.9 SPI 93 Ford Escort
212whp 262tq <-outdated #'s.
And with stock 1-7/8" Exhaust.
Currently full 3" and e85.
jeffescortlx is offline  
    Reply With Quote