Focus Fanatics - View Single Post - Engine rebuild on SPI ?
View Single Post
Old 11-04-2008, 12:35 PM   #1
focusmcfly
Focus Rookie
 
Join Date: Oct 2008
Fan#: 60080
Location: Southern California, United States
What I Drive: 2000 Ford Focus (SPI)

Posts: 20
FF Reputation: 1 focusmcfly Good Standing Member
Buy-Sell-Trade Rating: (0)
Engine rebuild on SPI ?

Some may have seen my post about the engine taking a dump on my 2.0 2000 spi focus. I decided I want to try and rebuild the engine myself. I might as well since its apart and out. I found the pistons online for under $200 and the head rebuilt with a 2 year warranty on ebay for about $300. I need to know a few things before proceeding.

1. How do you press the rods off and new pistons on ?
2. How much torque do I use when attaching the rod and bearing back on the crank? (Is there anything else I should know here as well)
3. Do I need new bearings?
4. If the cylinders look in good shape do I have to hone them?
5. Is it even wise to attempt a rebuild without experience?

Engine had less than 80,000 miles on it before valve seat fell and killed everything.

Thats about it. I have worked on cars doing various things over the years. But have never attempted a rebuild.





Last edited by focusmcfly; 11-04-2008 at 12:37 PM. Reason: add more info
focusmcfly is offline  
    Reply With Quote