Ford Focus Forum, Ford Focus ST Forum, Ford Focus RS Forum - View Single Post - Do I need adjustable control arms or will camber bolts be enough?
View Single Post
Old 09-26-2008, 09:05 AM   #4
wickedgreyzx3
Focus Fanatic
 
Join Date: Apr 2006
Fan#: 34204
Location: Cleveland, OH, IN
What I Drive: 2006 ZX3 Liquid Grey

Posts: 2,590
Points 5,927, Level 49
Points: 5,927, Level: 49 Points: 5,927, Level: 49 Points: 5,927, Level: 49
Level Up 89% Completed
Level up: 89% Level up: 89% Level up: 89%
Forum Activity 0%
Activity: 0% Activity: 0% Activity: 0%
FF Reputation: 17 wickedgreyzx3 Great Standing Member
Buy-Sell-Trade Rating: (2)
The rear camber bolts will give you half a degree of adjustment. It's recommended that camber be below 1.5 degrees. You might be ok, just keep a very close eye on inner tire wear on the rear. Also I don't comprehend inches, and haven't seen a machine that uses inches since I left school. So I couldn't tell you about the front.

What I run though is, un-adjusted camber in the rear. 0 degree toe in the rear, and slight toe out in the front. So I'd say that you're doin' pretty good for a good all around alignment.
__________________
Modifying cars is retarded. Buy a bike instead.
wickedgreyzx3 is offline  
    Reply With Quote