Focus Fanatics - View Single Post - sporadic's Turbo Duratec build thread
View Single Post
Old 06-30-2008, 12:27 AM   #164
brandon0133
1fastfocus05
 
brandon0133's Avatar
 
Join Date: May 2006
Fan#: 35345
Location: salisbury,nc, United States
What I Drive: 2005 zx4,

Posts: 1,592
FF Reputation: 3 brandon0133 Good Standing Member
Buy-Sell-Trade Rating: (31)
hey man whats up? im working on my intercooler piping useing exhaust pipe like u did,,my [problem is i cant run it the same way u did sense my car sits about 3 inches off the ground already...so what i had to do was make a 180 degree turn off the intercooler from the turbo to intercooler...has to all run from the driver side of the engine down near the tb and across the radiator and to then bend back into the intercooler...will this hurt anything? theres no room going under the car like i said and theres no room to come up on the pass side..not to mention the turbo im useing is from a eagle talon so both fresh air inlet and the turbo outlet are facing the same direction...any help? i only have one 180 degree turn and a 5 90's total in the intercooler piping..and maybe 3 45's
__________________
got a new focus all stock, starting new build
TEAM DURATEC #150
brandon0133 is offline  
    Reply With Quote