Ford Focus Forum, Ford Focus ST Forum - View Single Post - How-To: VHT Niteshades Tails
View Single Post
Old 05-19-2008, 05:51 PM   #4
FocusedEnergy
Focus Enthusiast
 
FocusedEnergy's Avatar
 
Join Date: Jul 2007
Fan#: 48574
Location: Douglasville, GA, US, GA
What I Drive: 2006 Liquid Gray ZX4SE

Posts: 443
FF Reputation: 3 FocusedEnergy Good Standing Member
Buy-Sell-Trade Rating: (2)
"After you wetsand apply 3-5 coats of niteshade to achieve the shine desired. Also wen clearing make sure to wetsand all impurities or flaws made while spraying on the clear."

I believe you meant 3-5 coats of clearcoat, not niteshade . Cool though- good writeup. I believe though that you have to let the paint really dry out and breathe before you coat it with wax, and if I'm not mistaken, that usually takes around 6 months. Just my two cents.

Again, good writeup.
__________________
SEDAN REVOLUTION #51
The tighter the budget, the slower the mod progress. Estimated completion date: September 2057
FocusedEnergy is offline  
    Reply With Quote