Focus Fanatics - View Single Post - Klondike's Build Thread:
View Single Post
Old 04-24-2008, 02:35 PM   #27
SquillyB
4.9L SC Stroker !!!
 
SquillyB's Avatar
 
Join Date: Apr 2007
Fan#: 45801
Location: El Mirage, AZ
What I Drive: SC 5.0 FOFO BUILD IN PROGRESS

Posts: 3,091
FF Reputation: 106 SquillyB Excellent Standing MemberSquillyB Excellent Standing Member
Buy-Sell-Trade Rating: (2)
Let's get back to the build shall we?

First you get some wood, I prefer 3/4 HDF no medium thanks or at least not for the rings. Medium density fiber wood can be used if high density is not available.

Here we have a piece of scrap that we will be using for the job of making the rings. This means the wood rings that the mid driver and tweeter will eventually mount in to. Two seperate rings will be needed of each size.



Some people use templates, I use the speaker itself. Trace the outline and with your jigsaw or what have you (DIY guys) cut out the rough shape.



Next drill some pilot holes large enough to accomidate the blade on your saw. Then start cutting from one spot to another in thirds. Soon you will have something like this.








__________________
MECP 1ST CLASS
FF08 FASTEST OVERALL TRACK TIME
SquillyB is offline  
    Reply With Quote