Ford Focus Forum, Ford Focus ST Forum - View Single Post - torque specs
Thread: torque specs
View Single Post
Old 06-20-2004, 07:56 PM   #4
madddogg
Focus Rookie
 
Join Date: Jun 2004
Fan#: 9265
Location: Massachusetts
What I Drive: 2004 ZTS

Posts: 18
FF Reputation: 1 madddogg Good Standing Member
Buy-Sell-Trade Rating: (0)
Re: Torque Specs

Quote:
Originally posted by BornAgainFordOwner
I have the 2004 Focus Shop Manual. (It's $155 from Helm, Inc.)

Wheel lug nuts - 94 lb-ft.
Oil pan drain plug - 21 lb-ft.
Oil filter box seems to contain the only filter tightening specs - 3/4 turn after gasket contact.
Front disk brake caliper retaining bolts (not SVT) - 21 lb-ft.

Brilliant! Thanks much. This is exactly the sort of specs I was looking for.

How would you rate the manual? I have had Chiltons and Haynes manuals in the past, never an official one like this. My experience with the Chiltons and Haynes manuals has been that they have been good for things like torque specs and such, but can sometimes lack in image quality and descriptions of repair processes.

Anyone buy one of these DVD's on ebay? Are they legit? http://tinyurl.com/237l6

Can anyone recommend a shop manual?

Thanks again,

-Jason
madddogg is offline  
    Reply With Quote