Ford Focus Forum, Ford Focus ST Forum - View Single Post - Problem (?) after Volant & throttle body install
View Single Post
Old 06-15-2004, 12:16 PM   #5
microtonal
FF #1 Most Wanted
 
microtonal's Avatar
 
Join Date: Sep 2003
Fan#: 470
Location: Seattle, WA
What I Drive: 2012 GTI, 2014 Forester XT

Posts: 6,890
FF Reputation: 12 microtonal Great Standing Member
Buy-Sell-Trade Rating: (7)
The sticky throttle got me too.
I messed with the throttle cable and stuff then someone told me to turn the idle screw a little bit and the sticky throttle was resolved.
The throttle butterfly/plate inside gets wedged or something at the idle postion.

When the throttle was sticky, I would buck off the line sometimes because I had to apply enough pressure on the gas/throttle to pop/unstick the throttle.
When I would press on the gas, it wouldn't go then I give a little more pressure and the throttle unsticks.

It was also intermittent. Would only do it when the temp outside was colde.

Well, I turned my idle screw about 1/4 turn and my throttle hasn't been sticky since.
__________________
Just reading.....
microtonal is offline  
    Reply With Quote