Ford Focus Forum, Ford Focus ST Forum, Ford Focus RS Forum - View Single Post - My work in progress 2004 PZEV sedan
View Single Post
Old 03-11-2008, 10:15 PM   #13
mjmallon
Focus Enthusiast
 
Join Date: Aug 2007
Fan#: 49270
Location: Azusa, Ca., United States
What I Drive: 2004 CD Silver LX PZEV (mtx75)

Posts: 218
FF Reputation: 23 mjmallon Great Standing Member
Buy-Sell-Trade Rating: (21)
Quote:
Originally Posted by SYZ View Post
looks really nice... question about the e-brake handle... were you able to attach that to your stock unit or did you have to modify it?
Hi,

the e-brake handle slides over the existing assembly once you remove the factory cover (either by putting it in a vice and prying it off with a hammer and chisel, or by cutting) though for the best fit, you need to file down the bottom part of the lip around the button 1/4" or more, else the button will only stick out by 1/4" or so, and since the handle is shorter than the stock handle, the boot will pull off whenever the brake is disengaged.

All things considered, it was fairly easy once I decided to remove the brake assembly from the car to get the factory handle off, though I cut open 3 knuckles trying to pry the damn cover off before I did that!

thanks for the compliments, cheers!

-- michael
__________________
My "SVT EAP" D23E sedan...
done: Recaro's ◆ HID's ◆ BSD ◆ Brisk LGS ◆ SVT brakes & suspension ◆ 22mm RSB
wishlist: built engine ◆ oil sump baffle ◆ mazdaspeed3 tranny ◆ stage 2 turbo ◆ tune
mjmallon is offline  
    Reply With Quote