Ford Focus Forum, Ford Focus ST Forum - View Single Post - Lentech install with pics
View Single Post
Old 03-03-2008, 06:06 AM   #32
Focusnewb
Focus Addict
 
Focusnewb's Avatar
 
Join Date: Sep 2005
Fan#: 27975
Location: Columbus Ohio, United States
What I Drive: 2001 Sangria Red 4dr SE

Posts: 1,231
Points 1,817, Level 25
Points: 1,817, Level: 25 Points: 1,817, Level: 25 Points: 1,817, Level: 25
Level Up 17% Completed
Level up: 17% Level up: 17% Level up: 17%
Forum Activity 0%
Activity: 0% Activity: 0% Activity: 0%
FF Reputation: 11 Focusnewb Great Standing Member
Buy-Sell-Trade Rating: (4)
Quote:
Originally Posted by BOOSTA View Post
what exactly does a valve body do just curious?? and how much did it cost you to get??
They run around $700 last time I looked.

My amateur analysis is that what a valve body does is pump the transmission fluid to control the clutches in the ATX. The improved valve body will pump the fluid at a higher pressure and give you firmer shifts. This will compensate somewhat for the slippage that can come from increasing your motor's torque.

You can get a similar effect by adjusting this through your ECU as with a chip flasher but in my experience it only lasts a short time until the ECU adjusts to your driving habits.
__________________
Panties aren't the best thing in the world but they are next to it.

I would rather drive the slow car Rusty built than the slow car I built.

Do your own repairs, it's not rocket surgery !!
Focusnewb is offline  
    Reply With Quote