Ford Focus Forum, Ford Focus ST Forum, Ford Focus RS Forum - View Single Post - How To: Aftermarket radio wiring with stock SVT sub and amp.
View Single Post
Old 02-26-2008, 10:07 PM   #4
Focus Enthusiast
pat247's Avatar
Join Date: Sep 2005
Fan#: 27781
Location: Norman, OK
What I Drive: Focus SVT

Posts: 526
FF Reputation: 19 pat247 Great Standing Member
Buy-Sell-Trade Rating: (17)
Aftermarket radio wiring with stock SVT sub and amp.

After searching around for wiring info for the stock SVT sub and amp, and unable to find any usable info. I decided to make a small "how-to" for you guys.

Solder and shrink wrap wiring harness connections

Wrap wire loom around wire bundles (so it looks good)

Strip single RCA cable and twist core wire and shield wire like shown.
Solder "male" spade connector to blue/white wire.

Solder Blue/White wire to the White/Red wire.
Solder RCA core wire to the White/Black (+) wire.
Solder RCA Shield (negative) wire to the Grey/Black (-) wire.

Shrink wrap connections

Will update with more pics of the sub wiring harness later.

If anyone has any questions I will answer them as best I can.
2003 ZX5 SVT, Pitch Black, JRSC/BBK Sold
pat247 is offline  
    Reply With Quote