Originally Posted by mikef
Would i be correct in assuming that no special tool is required for the removal of the stock head unit in 07 models? Once you remove the Bezel or whatever it's called, it's just a matter of unscrewing the head unit?
Looking at the head unit in my car there are no slots for those "U" shaped tools that i needed for my 99 Cougar (and presumably most other Fords). All i see is a small 3/4" slot on the upper right side of the unit.
Correct...all you will need is either a 7mm nut driver or a 7mm socket and at least a 3" extension.