Focus Fanatics - View Single Post - Rear Sway Bar Install
View Single Post
Old 11-07-2007, 01:20 PM   #3
SYZ
FocusFreak
 
SYZ's Avatar
 
Join Date: Jan 2006
Fan#: 31122
Location: Scottsdale, AZ
What I Drive: toxic waste

Posts: 2,433
FF Reputation: 106 SYZ Excellent Standing Member SYZ Excellent Standing Member
Buy-Sell-Trade Rating: (14)
I also have a 2005 ZX3 S, which did not come with a rear sway bar. Steeda sells a kit that will allow you to bolt up their sway bar. I believe it's a 21mm bar as well.

Or, you could get the aluminum sway bar clamps that BiscuitNinja sells and use whatever rear bar you want. Make sure that the bar comes w/ the hardware to mount it though, otherwise you will have to get the endlink separately.

Personally, my setup is the BiscuitNinja aluminum clamps w/ the Saner/Auto-X ZTS 24mm adjustable rear swaybar. Total cost was around $250. Steeda's kit is about $150, but its not as beefy. Your choice.

BTW, this should be in the suspension section.
SYZ is offline  
    Reply With Quote