Originally Posted by 1turbozx3
so whats controling the voltage to teh pump now still the ecu
can u get a write up on the wiring u did
and i ready where u said u replaced the two hose on the pump with the EFI line to right do they pull right off or did u have to cut those
As far as i know it is still the ecu controlling the pump voltage. no special wiring. all you have to do is cut a small slit in the clear plastic hose where it attaches to the top and it wil pull right off. as for the side on the pump there are 2 little screws holding the check valve on. take those out and it slips right off.