Focus Fanatics - View Single Post - Rear Camber Bolt Install
View Single Post
Old 06-11-2007, 12:08 PM   #2
outafocus03
Focus Enthusiast
 
outafocus03's Avatar
 
Join Date: Jan 2005
Fan#: 17425
Location: Ohio
What I Drive: 2003 Black ZX5

Posts: 224
FF Reputation: 1 outafocus03 Good Standing Member
Buy-Sell-Trade Rating: (5)
pretty easy install. (working from memory about 3 years ago) The bolt that you remove to replace with the camber bolt has a nut on the back side of it. The nut is welded to the suspension. You will need to cut the welds with a cut off wheel or die grinder then you can smack the nut with a hammer to break it off the rest of the way. Grind down any residual welds left on the suspension then replace the new bolt in the hole. Setting the camber with the new bolts is pretty much guess work if you're doing it yourself. There is a lobe on the bolt that controls the camber adjustment.
__________________
JRSC BBK, full exhaust, progress springs and AGX dampers custom system install etc..... SOLD
Spring Into Focus 06' Best Engine Winner
outafocus03 is offline  
    Reply With Quote