Focus Fanatics

Focus Fanatics (http://www.focusfanatics.com/forum/index.php)
-   Fanatics: AR, LA, MS, OK (http://www.focusfanatics.com/forum/forumdisplay.php?f=105)
-   -   Anyone Know how to swap front springs out? (http://www.focusfanatics.com/forum/showthread.php?t=90819)

eazyrider_tim 07-07-2006 11:50 AM

Anyone Know how to swap front springs out?
 
I know how to do the rears myself, I just need help swapping out my svt springs for the progress springs. Let me know if anyone can help, thanks.

eazyrider_tim 07-07-2006 02:28 PM

ok, my coworker has mcpherson spring compressors, now I found directions here.

http://jason.hodges.cc/Welcome%20to%...aljet%20Forums!.htm

But its missing a step, how do you get the springs off the strut without killing yourself.

"9. Install a set of spring compressors to the old springs and tighten them down just enough to put a little tension on the springs so that they won’t expand too much during the removal of the center (shaft) nut and cap assembly."

fallacious_focus 07-08-2006 09:54 AM

sounds like you have to drop the strut out...that is why the front takes so much longer. good luck man, if i didnt work weekends i would definately help and offer a little moral support.

eazyrider_tim 07-10-2006 03:29 PM

No, I got it done no problem. Feels good doing things yourself. So far I have done everything to my car myself!

its low! I need to trim some carpet out the back wells, it rubs on dips. But it rides stiffer than stock, and the svt springs, its just low, lol........I love it!

Now I know how to do them, I can help someone else out when they need it done!

fallacious_focus 07-10-2006 08:40 PM

Quote:

Originally posted by eazyrider_tim
Now I know how to do them, I can help someone else out when they need it done!
haha, im gonna be getting the koni sport kit in a couple of months, so ill probably need some help then. i wish that i could say that i have done everything myself but i am not very mechanically inclined.

eazyrider_tim 07-11-2006 10:26 AM

No problem, let me know. I do need to get my rear fenders rolled now though. Does anyone know how to use that tool?

fallacious_focus 07-11-2006 08:20 PM

that i dont know, but i know that beau has done that.

eazyrider_tim 07-12-2006 09:03 AM

What is his username on here again?

eazyrider_tim 07-12-2006 10:05 AM

http://www.cryogen97.net/howto/rollfender.html

Found a good how-to, Imma have to jack mine up a bit first, and then just use the small end of the bat, its going to be 102 degrees today, and on a black car I am sure I don't have to use a heat gun to keep the paint from cracking on the inside.....I'll post up some pics, Imma get it done right after work today.

I need my rears done maybe 5mm....so I won't flare it out, just bend the inner lip up to 80 degrees vs. the horizontal its at stock.

Well, if anybody needs to get lowered or rolled, let me know, I can do it for a small fee or barter, heheehehee.

And I know of two shops that will align you for cheap, seeing as most shops don't mess with lowered cars. Also, I know where you can get your car passed inspection, if you have any "issues", i.e. tint, headers, etc.

PM me.


All times are GMT -5. The time now is 10:56 AM.


http://www.focusfanatics.com/aboutus/copyright.asp