Focus Fanatics

Focus Fanatics (http://www.focusfanatics.com/forum/index.php)
-   Brakes, Suspension & Body Chassis (http://www.focusfanatics.com/forum/forumdisplay.php?f=159)
-   -   Brake and Suspension Interchange Guide 00-06 (http://www.focusfanatics.com/forum/showthread.php?t=82136)

CDSilver5DoorSVT 04-17-2006 01:38 PM

Brake and Suspension Interchange Guide 00-06
 
Ok, since Ford likes changing things, I thought I'd give everyone the Ultimate guide for Front Suspension Interchangabilities........

Spindles:
00-04 Non SVT......all non SVT cars had the same spindles
02-04 SVT.......All SVT cars had the same spindles
05......all 05 cars had the same spindles
06......all 06 cars had the same spindles


Control Arms:
00-04 ALL......Svt or Non, they were all the same
05-06........All 05-06 were the same


Struts:
00-05.....All will interchage, although different rates were on different models, they all will interchange
06.......06 Ford thought they would mess everything up and redegigning the struts and springs


Springs:
00-05.......Like the struts, all will interchange between 00-05
06........all by themselves

So, with information above, this is how things boil down....

1. Svt Spindles are direct replacement for any 00-04
2. To Do an SVT Brake Swap on an 05, you must Use The 00-04 Lower Control Arm(Ball Joints Are smaller)
3. To Do an 05 Brake Swap on an 00-04, you must switch the 05 Lower Control Arm(Ball joints are Larger)
4. To Change to 05 and earlier struts and springs on an 06, you must change shocks, springs, and Spindles(the 06 has a larger opening for the strut to fit in)
5. To do an SVT swap on an 06, you must change spindles, struts, springs, and lower control arms

Chick 04-22-2006 09:59 PM

Great write-up[thumb] This can be a excellent sticky!

viney266 05-11-2006 01:18 AM

Agreed, very nice. Why oh why can't Ford leave things alone. That is some great info!

jresayo 05-18-2006 08:22 AM

i thought to switch the 2006 to a svt suspension ,all you need is the svt suspension kit and spindles.

CDSilver5DoorSVT 05-18-2006 09:44 AM

No, you'll need the suspension kit and 05 spindles........

Angelslave 05-23-2006 07:52 AM

So I should be able to install a SVT suspension kit on my 02 ZX3 with no problem then?

CDSilver5DoorSVT 05-26-2006 09:31 PM

Yes......complete bolt on

cyberface 06-15-2006 06:12 PM

What's so different with the SVT suspension vs Other Models and how does that relate to the 2001 Wagon?

Massive 07-19-2006 12:53 PM

I was able to put SVT rotors and calipers on my 2005 ST without changing the lower control arm. I did this last night on my car. I'll post pics as soon as I get them up and hosted [thumb]

I think I'd even be able to get by with just the rear bracket that bolts to the spindle, as the calipers are very close to identical.

SkaAddict 08-10-2006 04:53 PM

^
Yeah, I was going to say...didn't Ford use SVT spindles on all of the '05+ models because they increased the front rotor size by 15% or something?


All times are GMT -5. The time now is 12:13 PM.


http://www.focusfanatics.com/aboutus/copyright.asp