Focus Fanatics

Focus Fanatics (http://www.focusfanatics.com/forum/index.php)
-   DURATEC Performance (2003-2007) (http://www.focusfanatics.com/forum/forumdisplay.php?f=41)
-   -   Exhaust Videos and Sound Clips --> Link Them Here (http://www.focusfanatics.com/forum/showthread.php?t=59148)

autocrossman 09-13-2005 01:52 PM

Exhaust Videos and Sound Clips --> Link Them Here
 
I was wondering what is the best sounding exhaust system out there. If you have a link to a video clip or an exhaust sound on a Duratec exhaust system, please post it here.

Foci_Fosho 09-13-2005 02:40 PM

I'll have mine added in the not to distant future.

Probably by later today. I hold a 88% Non-flake rate. Better than most people.
[cool]

---EDIT: Done deal....
magnaflow.wav

1) I know about the "hard start"
2)First rev is to approx 2500 rpm
2nd is 3,000, 3rd rev is 4,000 rpm.

and the last one was just a quick punch.

Duratec Foci 09-13-2005 05:16 PM

Here's my video from a cold start, exhaust mods listed below.
Click here to see the video

Lil PZEV 09-13-2005 10:21 PM

This can stay since it's specifically for one type, but I'd encourage anyone who posts a clip here, to also add it to the FF Exhaust Clip thread in Focus General Chat, here, if you haven't already done so. [:)]

From that thread-
Pardon the clattering noise of my lens cap falling on the pavement, hopefully this site works for all. Oh yeah, I revved the car up to a little over 2k, then up to 4k, then more normally brought it up to 2k... so the last noise is kinda similar to what it sounds like as you accelerate (quickly) up to maybe 30 mph? I find the exhaust is loudest around 16-1800 rpm, then it transitions into a mellower tone as you speed up or slow down.

http://thumbs.streetfire.net/A44DB5E...F3D29E2A3C.jpg

Click here to see Video


Borla.

Lil PZEV 09-16-2005 09:26 PM

autocrossman, why don't you start your own thread(s) or do a Search, since other than the exhaust part that's not got to do with Exhaust clips.

As for order, I would personally say Intake, Exhaust (maybe Cam Adjustment put here, after I & E are affected), Header, SCT. But you can really do it whatever way you'd like, if you get the SCT now, you'll still have it later, etc...

autocrossman 09-19-2005 08:32 AM

i did start my own thread.. by the way, I just had the rear engine mount installed today. from VF Engineering. The mod was worth it to a point. you can feel the engine a little more at a stop, but when shifting, you can barely feel that it's doing it's job. The mod was worth it to a point. Definately if you are planning to drag race.

autocrossman 09-25-2005 07:14 PM

now i'm starting to feel that the shifting is a lot better now. didn't notice it after I started driving it more. Definately a good mod if you have the money. I would recommend a SCT superchip and have the idle increased to 900rpm. Mine is idling at around 600rpm and it's shacking too much. As soon as you start going, it disappears. It has more torque too. I quess I have to get used to it.

beefbusta 10-06-2005 01:51 PM

Hey, I just wanted to let you know dude, I bought a Borla Exhaust for my 2.3L off borla.com, they are on clearance there, cheapest price around, it was 363.99 + like 40 dollars shipping, still an awesome price... mine is coming in probably tomorrow, my friend has borla on his focus and it sounds tight as hell. just thought i'd let you know, if your gonna get borla, get it now cause theyre being discontinued for the 04 duratec focus. :)

Lil PZEV 10-06-2005 05:07 PM

Why would they discontinue it when the same system fits the 05/06 Duratec?

autocrossman 10-06-2005 05:33 PM

1 Attachment(s)
I bought mine three days ago and it's coming in tomorrow. I can't wait for it to get installed. I was going to say that this is the cheapest price arround but nobody has noticed it because everybody is too busy looking at other online performance shops. I'm surprised and excited. Everyone should have a borla. [cool]


All times are GMT -5. The time now is 01:05 PM.


http://www.focusfanatics.com/aboutus/copyright.asp