Focus Fanatics

Focus Fanatics (http://www.focusfanatics.com/forum/index.php)
-   General Technical Chat (http://www.focusfanatics.com/forum/forumdisplay.php?f=47)
-   -   Keep blowing Fuse 32 (http://www.focusfanatics.com/forum/showthread.php?t=5459)

jhowton 01-14-2004 05:35 PM

Keep blowing Fuse 32
 
Hello,

I am a newbie here although I am quite active in some other automotive forums. My wife recently bought a 2001 Focus wagon (estate) with the 2.0L Zetec engine. Twice now fuse #32 (10A) has blown. This takes out the taillights, instrument panel lights, climate control illumination, gearshift illumination and rear wiper as well as some other things that we probably haven't discovered. The emergency blinkers, headlights and brakelights still work.

Any BTDT or ideas on what to check first? The first thing that came to mind is perhaps a bad headlight switch since that component seems to be common to all of the other circuits (according to the Hanes manual), but I thought I'd post here before I start changing components with reckless abandon.

She just called me and said that the fuse blew again so she replaced it with one of the ones I left in the glove compartment which immediately blew when she turned the lights on again. Help, I don't want to pay a dealer to fix this if possible.

Thanks in advance.

liquid01 01-14-2004 11:01 PM

Check the light posts to see if any leaks(ice) is in the sockets possibly front lights........gets cold here tooo..

jhowton 01-15-2004 08:35 AM

Thanks for the tip, I'll check it out.

Regards

eibachzx3 02-02-2004 12:15 AM

your wiring for your ground might be fried too...thats the problem i kept running into on my other blown fuses

jhowton 02-02-2004 08:29 AM

Thanks for the information. What I have found so far is that the taillight bulb holders seem kind of crispy and brown although there is no sign of water leakage. I cleaned the contacts and bulbs and re-installed everything although that didn't solve the problem -- I am still blowing the fuse. It seems to be really sporadic at this point, my wife can drive for a week with no problems, then she'll get in the car and fuse 32 will blow. Other times every fuse inserted blows immediately. I am trying to get it so that it is consistently blowing fuses so that I can unplug everything on that circuit, and plug everything back in one by one until the fuse blows. I also think that I am going to change out the tailight bulb hoders, I'll check the ground while I am at it. Anyone know the locations of the chassis ground points?

Thanks

dameon81 06-07-2007 08:30 AM

Im having this exact problem. Started 2 days ago. My Instrument panel is out, as are my Parking lights (front and rear) and my Plate lights. Turn signals still work, as do head lights and fogs when the switch is on (but i have no taillights at night! [paranoid] [eek]). Tracked it down to "Fuse #32". Replaced it with the standard 10a while the Headlight Switch was "on" (oops) and it popped immediately. Put a 15a in with the switch off and turned the switch on and it popped immediately. Theres an obvious short somewhere..... just not sure where [scratch].

Due to rain for the last few days I havent been able to attempt any of the suggested fixes, but I've heard several different suggestions from various posts talking about the same thing.

If anyone has a more solid solution, lemme know asap! [pray] Im going to try to salvage a Headlight switch Assembley and also check the Rear Plate Light connections, since both have come up as solutions and Ill repost if I find anything definite.

[ffrocks]

Impaled 06-07-2007 09:15 AM

Good luck with that man could be a short anywhere.

penguin 06-07-2007 09:16 AM

I would check the wires going to the rear tailgate from the carbody to see if the wires for the license plate light have flexed and shorted out.

While anything is possible, I doubt that this type of problem is due to a faulty light switch.

dameon81 06-07-2007 06:04 PM

Yea as soon as work and the weather cooperates, im gonna check the wires first. Most of the posts that I have see regarding this problem were a result of the Hatch Plate bulb wires making contact somewhere on the body. So thats where im gonna start.

covert1 06-08-2007 04:30 PM

Please refer to this thread, too.


All times are GMT -5. The time now is 09:12 PM.


http://www.focusfanatics.com/aboutus/copyright.asp