Ford Focus Forum, Ford Focus ST Forum, Ford Focus RS Forum

Ford Focus Forum, Ford Focus ST Forum, Ford Focus RS Forum (http://www.focusfanatics.com/forum/index.php)
-   General Technical Chat (http://www.focusfanatics.com/forum/forumdisplay.php?f=47)
-   -   Tips on removing header heat shield? (http://www.focusfanatics.com/forum/showthread.php?t=34255)

revamp 01-12-2005 02:07 PM

Tips on removing header heat shield?
 
Hey all,

with cold weather here and lots of time on my hands, I was wanting to remove my SVT header heat shield and paint it with a hi-temp enamel. The question is, I was wondering if it is possible to remove the heat shield from the engine compartment. It looks like it is wedged in there real tight and if I have to remove other parts to wiggle it out, it might not be worth the hassle...

Also, there are only 5 bolts, right? 4 across the top and one at the bottom/front (behind the radiator), correct?

Any tips would be appreciated...

WD40 01-12-2005 02:52 PM

Moving to "Technical Chat".
Maybe more eyes would be of some help.

Yes, it does look awfully tight in there.
Hmmmm, shadyninja might be able to help....Clicky

"Quick Link McGraw" at your service.[:D]

revamp 01-12-2005 03:07 PM

'preciate it

:)

jaykirs 01-12-2005 04:51 PM

I was thinking about pulling the shield and wrapping my header with thermal wrap all the way down to the cat and then replace the shield for 2 reasons, 1) keeping the heat in the header is supposed to improve the exhaust flow through the header and 2) it also cuts down on heat built up in the engine compartment.

shadyninja 01-12-2005 05:04 PM

the paint will NEVER stick
It will last about 10 min.
Im sending mine to http://www.jet-hot.com/
kinda pricey but after you go through all that work you want it to be nice
well If I thought more people were interested in this..I would have taken pictures and started a thread its a pain in the a$$ but it can be done...re vamp pm me or contact me via aim ill help you

shadyninja 01-12-2005 05:13 PM

oh yeah jet hot has different colors also!!

revamp 01-12-2005 05:19 PM

maybe you are misunderstanding me....I just want to paint the HEAT SHIELD, not the headers....I see no reason why 600deg.+ enamel wouldn't stay put...

jaykirs 01-12-2005 05:23 PM

Yeah, the paint should stick as long as the shield is nice and clean before applying it ... at least it should, I don't see any reason why it wouldn't either.

shadyninja 01-12-2005 05:25 PM

oh ........... well ......... you have your work cut out for you...I had to persuade mine to come out..I dont think you would be able to get it back in with out scratching the paint up

shadyninja 01-12-2005 05:27 PM

I just browsed your post..then when I seen wd40 link you to my thread I assumed you wanted to paint the header(some people have tried this)


All times are GMT -5. The time now is 03:54 PM.