Ford Focus Forum, Ford Focus ST Forum, Ford Focus RS Forum

Ford Focus Forum, Ford Focus ST Forum, Ford Focus RS Forum (http://www.focusfanatics.com/forum/index.php)
-   General Technical Chat (http://www.focusfanatics.com/forum/forumdisplay.php?f=47)
-   -   2004 PZEV motor with p2004 code (http://www.focusfanatics.com/forum/showthread.php?t=320718)

popcornguy 07-09-2013 05:41 PM

2004 PZEV motor with p2004 code
 
according to my local mech the IMRC is stuck open. im not even sure how this works. i found out that there are 2 of them on top of the intake and i am very curious on if there should be any air coming out of them when plugged and blown through? if so than i dont know what it could be or how to fix it. if not i tried capping the end that already had a cap on it and the car lost power about 3 miles down the road. any suggestions or questions i can answer on how to fix this?

1turbofocus 07-09-2013 05:57 PM

The IMRC is the intake manifold runner controle , not sure what you mean plugged and blown through , they work off of RPM and load when you have met this criteria the manifold runner switches

You have a solenoid and a switch motor , I would check fuses , make sure you have voltage to the solenoid and vacuum

Tom

mark3inline 07-09-2013 05:59 PM

do a search first ? check link first in long list.
http://www.focusfanatics.com/forum/showthread.php?t=284991

popcornguy 07-09-2013 10:14 PM

thanks to both of you:) i will try that tomorrow afternoon and ill come back with a result:)


All times are GMT -5. The time now is 12:16 AM.