Focus Fanatics

Focus Fanatics (http://www.focusfanatics.com/forum/index.php)
-   DURATEC Performance (2003-2011) (http://www.focusfanatics.com/forum/forumdisplay.php?f=41)
-   -   Just bolt ons! (http://www.focusfanatics.com/forum/showthread.php?t=316408)

2011 FOCUS SE 05-12-2013 09:10 PM

Just bolt ons!
 
Alright guys i now have a k&n typhoon cai with stock em/cat after the cat its straight pipe to tip on my 2011 focus.. Car sounds great and just needs more get up and go from take off next week i am planning on ordering the lower rear mount from fs werks and also a cfm upk the week after that.. I am planning on also getting a obx header and a sct tuner from fs werks also.. If there is any one who has done all or some of the upgrades lmk becuase i want to see where i stand with stock vs with bolt ons.!.

Spinal 05-12-2013 10:37 PM

what exactly is a cfm upk?

2011 FOCUS SE 05-12-2013 11:38 PM

Central florida motorsports underdrive pulley kit..

AllCarFan 05-13-2013 07:21 AM

I would strongly recommend adding at least one muffer if you are going to add a header. A header with a straight pipe straight out is going to sound disgusting.

I dont understand your question either. You want to know where you stand stock vs the mods you have done....HP wise? Torque wise? 1/4 wise? 0-60? What, exactly are you asking here? DO you know how much HP you were making stock?

If this is, indeed, a HP question....with your CAI, UDPs, and muffler delete....you probably picked up 6-10hp at the wheels. WIth a tune and header, you will probably pick up 8-10hp at the wheels.

2011 FOCUS SE 05-13-2013 12:23 PM

Yeah its an all around question u pretty much answered the hp question and wb on tha track 1/4 mile? And yeah i am planning on putting one resignator mid way to create some back pressure and to quiet it down a bit.

streetfocus 05-13-2013 12:32 PM

Auto or manual? Others with the usual bolt ons have dyno'd (dynoed? dynod? Lol) around 135 hp / tq at the wheels. Should be good for 10 flat or better in the 1/8th and a mid 15 in the 1/4 mile.

2011 FOCUS SE 05-13-2013 11:41 PM

Sweet thats what i like to hear and its an auto.. Will cams make a difference with all the bolt ons i have and plan to put???

2011 FOCUS SE 05-14-2013 01:23 AM

Just a few more questions so they can all be answered if possible. After i install lower motor mount from fs werks header get sct and install the udp's the only other external bolt on is the cosworth im is it worth the fortune if im planning on adding cams later? What brand cams are available for my car?

CJohn364 05-14-2013 06:16 AM

Once you get the CAI, Header and Exhaust (2.5in or 3in recommended) in place, getting it tuned with an XCalIII will give you noticeable pickup.

I also agree that you should have at least one muffler or resonator in place with a header.

AllCarFan 05-14-2013 08:48 AM

dont waste your money with a lower motor mount. If you have a vice at your home, just buy the prothane bushings, press out the old bushings, and press in the prothanes. It will cost you less than $30. Mind you, you wont have that pretty piece of billet under there....but do you really need that?


All times are GMT -5. The time now is 06:38 PM.


http://www.focusfanatics.com/aboutus/copyright.asp