Focus Fanatics

Focus Fanatics (http://www.focusfanatics.com/forum/index.php)
-   MK1 Focus (http://www.focusfanatics.com/forum/forumdisplay.php?f=45)
-   -   Mach 1 lip? (http://www.focusfanatics.com/forum/showthread.php?t=315192)

mattmoz 04-26-2013 06:31 PM

Mach 1 lip?
 
what has to be trimmed on it to make it fit the zetec bumper?and if i can get a brand new one for like 189$is that a good deal?

TerryB 04-26-2013 06:46 PM

You have to trim the about 2" off each side of the lip at the fender well. I got a replica on eBay for about $70.00 shipped. The seller is americanmuscleperformance. I added mine to my Kaminari front lip. Google Mach1 lip on a Focus on google images. There's plenty of Focus' with the Mach 1.

andrev001 04-29-2013 03:09 PM

You have to trim it on sides and make a cut-outs where you gonna bend it to make it fit to the bumper. You have to cut like a triangle pieces from the inside of the lip. It helps a lot trust me. You can buy it from the website provided in previous post or search Mach 1 chin spoiler on eBay. They selling them for $58.99 with free shipping. This is how it looked on my previous wagon.

http://img580.imageshack.us/img580/4...0401160137.jpg

TerryB 04-29-2013 03:54 PM

Good tip about the triangle cutouts. I had to do quite a few to get the bend. The only drawback with mine was the way it was shipped. It was all curled up in a square box. It took forever to reshape itself.

andrev001 04-29-2013 07:38 PM

I know, it's a pain but on a warm day I just left it on a dash and sun took a good care of it by making it really soft to work with. Once installed it was perfect :)

Blue5ive 04-29-2013 11:23 PM

You can also try a Seat Cupra R lip. A bit diff than the mach 1 and only requires a little trimming to fit.


All times are GMT -5. The time now is 09:32 AM.


http://www.focusfanatics.com/aboutus/copyright.asp