Focus Fanatics

Focus Fanatics (http://www.focusfanatics.com/forum/index.php)
-   Engine & Transmission Swap (http://www.focusfanatics.com/forum/forumdisplay.php?f=9)
-   -   Blown my engine, looking for some pointer how to remove the engine (http://www.focusfanatics.com/forum/showthread.php?t=314742)

thejsx 04-21-2013 10:28 AM

Blown my engine, looking for some pointer how to remove the engine
 
I recently blew my engine, piston rod on cylinder #1 broke and went thru the block, Ford doesn't want to do the job on the warranty because I have headers and one of the O2 sensor was off and ran richer, did some over rev andblah blah blah , this is not the issue. Anyone got some pointers how to remove the engine? I started to make some place, was thinking of removing most of the front end to make some working place. I'm used to work on RWD V8 but it's my first time on a FWD. So any pointers are welcome to make me save some time! I'll post some pictures of the process

Juicedz 04-21-2013 10:48 AM

Well, looks like you'll be paving the way for diy workers and their 12-13 focus'. Granted, I hope I never have to pull the motor.

felixthecat 04-21-2013 11:02 AM

Wow, thats a bummer to hear that. I'd pull the hood & front bumper cover off. Drain the coolant & ps fluild. You can pull it from the top or bottom. Last time I did a earlier d-tech it came tru the bottom w/ the car jacked up on 4 jack stands.

Deftmetal 04-21-2013 11:03 AM

Ford is pulling my engine on the 29th. I could probably find out then

thejsx 04-21-2013 11:11 AM

So far I've removed my hood, battery box and air intake. I'm looking at removing header panel/bumper but I feel dumb can't manage to disconnect the goddamn headlight connector...[dunno]

ShoOff 04-21-2013 11:36 AM

wait wait wait, where did you find headers?

thejsx 04-21-2013 11:44 AM

well, any duratec headers will fit

ShoOff 04-21-2013 11:46 AM

can someone post a link to possible header choices for my 2013? Not to stray off subj i just didnt think there was anyhting avail. Everytime i try to look them up i never see anyhting avail for the 2012-13

Chris_HT 04-21-2013 11:53 AM

Quote:

Originally Posted by ShoOff (Post 4693617)
wait wait wait, where did you find headers?

Quote:

Originally Posted by thejsx (Post 4693626)
well, any duratec headers will fit

Quote:

Originally Posted by thejsx (Post 4693579)
I recently blew my engine



hmmmm

thejsx 04-21-2013 05:43 PM

shit happens


All times are GMT -5. The time now is 06:05 AM.


http://www.focusfanatics.com/aboutus/copyright.asp