Ford Focus Forum, Ford Focus ST Forum

Ford Focus Forum, Ford Focus ST Forum (http://www.focusfanatics.com/forum/index.php)
-   General Forced Induction (http://www.focusfanatics.com/forum/forumdisplay.php?f=44)
-   -   Precision 6262 on zetec (http://www.focusfanatics.com/forum/showthread.php?t=313547)

zetecfreak 04-06-2013 12:10 AM

Precision 6262 on zetec
 
I have the oppurtinity to purchase a precision 6262. Ball bearing billet wheel. I can get it for next to nothing. My research tells me a focus will have trouble spooling this turbo. Appears to be designed for 680hp. Right now I have a eBay turbo and if is awful. So has anyone tried this turbo? As for my goals I'm just goofing off with the car right now. Just curious to see how leggy this thing would be.

Middleton 04-06-2013 02:33 AM

you say you have a ebay turbo set up right now? any way you could pm me so i could text you about some questions? i like the affordability of ebay turbo set up and its not gonna spool too often...do they create if any power? i just wanna hit the 200hp range....is it possible?

Mother Focus 04-06-2013 05:31 AM

I run a 6262, see 10 psi @ 4,000rpms.

700whpfocus 04-06-2013 07:08 AM

Quote:

Originally Posted by Mother Focus (Post 4672046)
I run a 6262, see 10 psi @ 4,000rpms.

how could you make boost to begin around 3500 rpm?

Mother Focus 04-06-2013 08:23 AM

What do you mean?

zetecfreak 04-06-2013 08:30 AM

Evo guys are claiming to see boost at 5k. Maybe the focus would spook it a bit sooner but that's still very laggy.

700whpfocus 04-06-2013 09:06 AM

is there anything you could do to the piping or engine mods to help you see 10 psi at a lower rpm?

Turbo Turtle 04-06-2013 09:35 AM

nitrous will get it rolling lol. i would rock it as long as your going for big power. i see no reason to use it for low boost though

zetecfreak 04-06-2013 09:37 AM

Agreed lol. I'm only going for 300whp max. Luckily this isn't my dd so I can afford to test a bit. Going to try a cxracing turbo I do believe. At worst u spend 250 and its junk but then we will know. Can't find a lot of testing.

Turbo Turtle 04-06-2013 09:42 AM

ive got one of those cxracing turbos i use for moch up. its a gt3582r copy. i would never run it on a car. the shaft is so small and loose that is bound to come off or at least dig into the housing after a little abuse lol.

Tim


All times are GMT -5. The time now is 12:19 AM.