Ford Focus Forum, Ford Focus ST Forum

Ford Focus Forum, Ford Focus ST Forum (http://www.focusfanatics.com/forum/index.php)
-   DURATEC Ti-VCT Performance (2012-Current) (http://www.focusfanatics.com/forum/forumdisplay.php?f=101)
-   -   Rear Motor Mount (http://www.focusfanatics.com/forum/showthread.php?t=313376)

ChalupaJones 04-03-2013 01:10 PM

Rear Motor Mount
 
I've been following a couple threads here and there that have been discussing rmm's in depth. I've been doing my own research as well. I don't know a whole lot about it but it seems to me that they all claim to do the same thing as the next. I'm looking for one that will stiffen things up with out rattling my teeth out. What reccomendations would you (FF members) suggest?

thejordan 04-03-2013 01:26 PM

cp-e is very very harsh. i would get the powerflex insert. otherwise you'll be finding new rattles every time you drive. not to mention your car isn't terribly powerful to make full use to lay down that extra grip.

rickdarris2004 04-03-2013 02:17 PM

I just put in a MS3 Motor mount last night. Firmed up nice with no rattles. Its amazing Ford actually put in the mount they did, it is sure cheap looking.

ChalupaJones 04-03-2013 02:22 PM

Quote:

Originally Posted by thejordan (Post 4667750)
cp-e is very very harsh. i would get the powerflex insert. otherwise you'll be finding new rattles every time you drive. not to mention your car isn't terribly powerful to make full use to lay down that extra grip.

Can you link it?

_RED_ 04-03-2013 03:34 PM

You can order a stock MS3 rmm at your local Mazda Dealership, the part number is : BBN-39-040 price is right around $40, also order the Factory Mazda bolt: 9YA0-2A-226A will cost about $9

Sent from my Galaxy Note 2

Arizona 04-03-2013 04:44 PM

Quote:

Originally Posted by ChalupaJones (Post 4667852)
Can you link it?

http://www.mc2racing.com/products/focus/rmm/index.html

Brabs_Weather 04-03-2013 06:54 PM

You should also get the rear bushing too. I believe this will fit.
http://powerflexusa.com/fordfocusmk2...ff19-1221.aspx

http://www.pumaspeed.co.uk/saved/Upr...lex_fitted.jpg

Indy'sexclusiveZx3 04-04-2013 12:04 AM

Or also the e focus rmm, I put it on my st and made a world of diff with no noticeable increase in vibs

ChalupaJones 04-04-2013 08:13 AM

Quote:

Originally Posted by Indy'sexclusiveZx3 (Post 4668574)
Or also the e focus rmm, I put it on my st and made a world of diff with no noticeable increase in vibs

I'm honestly probably going to do this.

Brabs_Weather 04-04-2013 08:23 AM

I do have the e-Focus rmm and while it does reduce the NV. I do feel it may be getting a little sloppy. Gonna look at the powerflex insert to the stock plus the rear insert at the anchor point.


All times are GMT -5. The time now is 12:16 PM.