Focus Fanatics

Focus Fanatics (http://www.focusfanatics.com/forum/index.php)
-   MK1 Focus (http://www.focusfanatics.com/forum/forumdisplay.php?f=45)
-   -   Best LED lights ? (http://www.focusfanatics.com/forum/showthread.php?t=312417)

HxCThumbs 03-21-2013 08:08 PM

Best LED lights ?
 
I have always loved the led look to any car, i wanted to start with the plate light and move all the way around and change all the lights. Since i have a plate light out i think its logical to start there, where is the best place that i can get long lasting, good looking LED lights ?! Thanks

calebstubstad 03-22-2013 12:10 AM

oznium.com or superbrightleds.com
oznium has AMAZING customer support, got replacement products shipped next day saturday delivery for free, and they didn't need the broken back. great guys to work with. superbrightleds is a little cheaper though, and has all the bulbs I assume you are looking for. i'd say superbrightleds is best for bulbs, and oznium I go to for anything else.

FocusedSlayer 03-22-2013 12:00 PM

All of the Led's that I've put in my Focus are from Superbrightleds.com , brake lights and license plate lights .

Sniper Focus 03-23-2013 05:49 PM

I get all of mine from Vleds.com, I like their stuff the best. They might cost a little more, but I never had a problem with their stuff and they have great service. Actually It looks like they've been getting more competitive prices since I purchased, but I always waited for coupon codes and sales.

The only ones that aren't from them are the plate bulbs from 42 draft designs, they had an awesome black friday sale on those. A lot of people here use these for the plates because they're cheap and they last.

DJFreshlySnipes 03-23-2013 05:55 PM

I ordered some from vled but the tail light bulbs didn't work because they didn't have resistors built in so my lights had the flash issue

Sniper Focus 03-23-2013 06:10 PM

Quote:

Originally Posted by DJFreshlySnipes (Post 4650511)
I ordered some from vled but the tail light bulbs didn't work because they didn't have resistors built in so my lights had the flash issue

No led tail bulbs have load resistors built in, I have their platinum tails and I ordered load resistors with them and they work.

Their new-new Triton bulbs do have load resistors I believe, but they cost $$$.

HxCThumbs 04-02-2013 09:26 PM

Quote:

Originally Posted by DJFreshlySnipes (Post 4650511)
I ordered some from vled but the tail light bulbs didn't work because they didn't have resistors built in so my lights had the flash issue

Quote:

Originally Posted by Sniper Focus (Post 4650531)
No led tail bulbs have load resistors built in, I have their platinum tails and I ordered load resistors with them and they work.

Their new-new Triton bulbs do have load resistors I believe, but they cost $$$.

So i got some but i have the same flash issue, what do i need to get so they work?!

Sniper Focus 04-02-2013 09:35 PM

Quote:

Originally Posted by HxCThumbs (Post 4666746)
So i got some but i have the same flash issue, what do i need to get so they work?!

6 ohm 50w load resistors for each LED blinker bulb.

HxCThumbs 04-02-2013 09:44 PM

Quote:

Originally Posted by Sniper Focus (Post 4666765)
6 ohm 50w load resistors for each LED blinker bulb.

What do they do just replace the plug?

Sniper Focus 04-02-2013 09:56 PM

Quote:

Originally Posted by HxCThumbs (Post 4666774)
What do they do just replace the plug?

No you splice them in at the turn signal wire and ground, they simulate the resistance of a regular light bulb so the system doesn't hyperflash.

http://www.tacomaworld.com/forum/att...-install-2.jpg


All times are GMT -5. The time now is 06:45 PM.


http://www.focusfanatics.com/aboutus/copyright.asp