Ford Focus Forum, Ford Focus ST Forum

Ford Focus Forum, Ford Focus ST Forum (http://www.focusfanatics.com/forum/index.php)
-   General Forced Induction (http://www.focusfanatics.com/forum/forumdisplay.php?f=44)
-   -   contour turbo build (http://www.focusfanatics.com/forum/showthread.php?t=311926)

jmcrides03 03-16-2013 08:01 PM

contour turbo build
 
well i started oplanning a build for my old focus but as they all do eventually my spi commit suicide. original plans for the contour were to be n/a with itbs and aggressive cams but the boost bug bit one again so its time for a turbo build. right now im still in the planning stages. what i have so far is 39# ford racing injectors walbro 190 pump garrett gt28 turbo some cheap boost gauge i got on here, bosch wideband but no controller and a turbo xs bov. this is going to be a slow build since im on a budget. next thing i plan on picking up will be a stock focus manifold to modify to accept the turbo. all other parts will slowly get accumulated as i go. for starters gonna run low boost on stock block with 76k miles. the 3 biggest things i have left to get are gonna be the wideband, an innercooler and the sct.i have a fmic from a tdi but i dont think ill use it since its plastic. few questions i have are at what point is a MAFia necessary will i need one even at low boost. also not sure if it would be the same for the contour as the focus. i geuss i should have mentioned by low boost i mean aroun 8-10 psi nothing too crazy. sorry for the run on im just excited to get things rolling or should i say spooling [driving]

1turbofocus 03-16-2013 08:52 PM

You will need a MAFia for that amount of boost

Tom

ZXthrizzle05 03-16-2013 09:22 PM

X2!!!

jmcrides03 03-17-2013 08:21 AM

well i geuss add that to the list of things needed before tuning

jmcrides03 03-27-2013 06:25 AM

no updates yet still waiting on my turbo to show up starting to think im gonna have to file a paypal claim on it and start shopping around again. its been almost 2 weeks since i won it and i paid within 5 min of auction end, yet it hasnt showed up and its only coming from 2 states away. and of course seller is unresponsive. i hate when people play this crap on ebay happens more than id like to admit

jmcrides03 03-27-2013 07:11 PM

turbo finally showed up today. turned out to be a garrett gt2560s. basically non BB gt28.should make more power than a stock block zetec can handle

jmcrides03 03-31-2013 11:18 AM

ill post pictures of things when i figure out how to upload them ith my new phone. i just ordered a turbine inlet flange with gasket and will be going asap to pull apart to get a zetec focus manifold to modify. not sure if the focus manifold is heavy enough to hold up to a turbo without cracking ill have to look into that more

Mother Focus 03-31-2013 11:50 AM

You can get an SPA for cheap, there is a cast down pipe too it would be much easier, cheaper and much more reliable.

jmcrides03 03-31-2013 01:33 PM

ill have to make sure an spa would fit on a contour but i have thought about going that route. actually that was my original plan but i have the t25/t28 flanged turbo so id have to have an adapter to t3as well and i am going to use the internal wastegate so id have to get a block off for that also. still not completly decided on what to do.

jmcrides03 04-17-2013 06:36 AM

movin slow but making progress. workin on running 3 inch exhaust gonna slowly start replacing sensors and everything


All times are GMT -5. The time now is 04:23 AM.


http://www.focusfanatics.com/aboutus/copyright.asp