Focus Fanatics

Focus Fanatics (http://www.focusfanatics.com/forum/index.php)
-   General Technical Chat (http://www.focusfanatics.com/forum/forumdisplay.php?f=47)
-   -   SVT Header Swap (what is this part called?) (http://www.focusfanatics.com/forum/showthread.php?t=309929)

marcanjelo7 02-22-2013 03:32 AM

SVT Header Swap (what is this part called?)
 
Hello fanatics,

I recently did the svt header swap and the only major problem i had with clearance was this line that is touching the cat. I believe that is the rack. Is this line different on the svt's? I know now this is where my leak is coming from. I tried looking at tousley's parts diagram, but I cannot find the name of this part to order one. Do you know what it is called? Thanks peeps in adavance!!!

http://i1288.photobucket.com/albums/...psd9dc1bba.jpg

sleepyboy 02-22-2013 03:37 AM

It's a hard pressure line and is the same as far as I know to the normal zetec rack. I'm leaking at the same spot after I broke a motor mount and whacked the crap out of it. I think it only comes on the rack and is not a separate part to order but I'm not too sure on that.

marcanjelo7 02-22-2013 04:16 AM

hey how's it going? thanks man haha it's like we all go through the same thing, but man that would suck if you can't get that part separate.

sleepyboy 02-22-2013 04:27 AM

Yea, I haven't tried fixing it yet either, hopefully it's easily fixable problem.

marcanjelo7 04-23-2013 02:18 AM

hey guys I couldn't find it new so I just been pulling it from the pick and pull. I have gone through four of these as temporary fixes. I can't seem to figure out why it's like this. To recap I did the svt header conversion with the svt cat and flex on a sedan. The center pressure line the goes from the rack and back into the rack keeps touching the cat. I eventually want to get an orp as I know it won't touch that line. Has anyone with a sedan experienced this?? I really don't mind changing it every two weeks, but I think they are running out of focuses at the yard lol..

sleepyboy 04-23-2013 02:28 AM

Your header could be bent which would cause it to be too close to the rack?

TheGlassMaker 04-23-2013 02:35 AM

The hard pressure line that comes off the pump? On mine which was a SPI then swapped to a zetec the line from the pump isn't like that it just slides into the rack and it has a cover to slip over it and you bolt the cover to the rack. The cover holds the line in place.

marcanjelo7 04-23-2013 02:46 AM

no way I hope not. I really can't tell tho it doesn't look like it, but I also know that on the cat it's not connected to a bracket I wonder if I can find one if that would help or I was thinking of cutting that line and and somehow with an elbow fitting moving it out the way. I don't know man I really love this header just trying to figure something that will make it last until I can get an orp.

marcanjelo7 04-23-2013 02:48 AM

no it's the one on the rack. It comes off the rack where all the other lines connect and then connects back into the rack in the middle also has a u shape


All times are GMT -5. The time now is 11:33 PM.


http://www.focusfanatics.com/aboutus/copyright.asp