Focus Fanatics

Focus Fanatics (http://www.focusfanatics.com/forum/index.php)
-   General Forced Induction (http://www.focusfanatics.com/forum/forumdisplay.php?f=44)
-   -   Some Questions (http://www.focusfanatics.com/forum/showthread.php?t=309683)

freemind 02-19-2013 01:09 PM

Some Questions
 
1) Which DiabloSport mafia do I need? Part # please.

2) Will a 3" MAF tube that is 4" long be okay? All my intercooling tubing is 2.5"


The goal is 220-240whp.

Those are the most important things for now.

Thanks in advance.

Earls32 02-19-2013 04:48 PM

Quote:

Originally Posted by freemind (Post 4596494)
1) Which DiabloSport mafia do I need? Part # please.

2) Will a 3" MAF tube that is 4" long be okay? All my intercooling tubing is 2.5"


The goal is 220-240whp.

Those are the most important things for now.

Thanks in advance.

Mafia
http://www.racingpartssolution.com/diablosport-mafia/
Manufacturer: DiabloSport
Manufacturer Part No: F7373

Yes on the maf tube

ZXthrizzle05 02-19-2013 10:15 PM

couldn't have said it an better

1turbofocus 02-20-2013 05:37 PM

The 4 inch will be fine as long as you have at least 8 inches before a turn before and after the MAF , If you have a 6 inch tube you can get by with 5-6 inches before a bend

The shorter the MAF tube the further away a bend as to be or it has no time to help straighten out the air for a clean pass over the MAF

C-F-M also sells them and there a sponsor on this site , always good to support sponsors when we can and I am sure as good a price or better , ask for william

Tom

sporadic 02-21-2013 06:46 AM

Tom nailed it. It's not just the length of the MAF tube, but how straight the air is before and after. A BOV too close will also mess up readings.

Energyblue98 02-28-2013 11:21 AM

instead of using a mafia, I believe you can use an 05+ slot style maf?

ZXthrizzle05 02-28-2013 03:28 PM

Still need diablo with that. I am runnin that maf with the mafia

Energyblue98 02-28-2013 04:51 PM

not for his goal of 220-240 whp?? I was told the slot style will be good until around 400whp. There's a guy on teamzx2 (sobe-it) running his slot style on about 20psi

http://teamzx2.com/threads/20386-Sob...cs-2-13/page20

freemind 02-28-2013 09:03 PM

Thanks for the advice insofar.

I bought the DiabloSport MAFia.

Now it is time to talk about widebands,

I am looking at getting the Innovate MTX-L and using a VEI Systems Dual monitor gauge. It displays Vacuum/Boost Pressure and Wideband Air/Fuel Ratio in one gauge.

I do not want an "A" pillar gauge pod set up because, I do not like them, people will know that you have a setup to steal and, I plan on sticking a set of Morel built Xtant XIS 2.4's in the "A" pillars. Plus it is 2 gauges in one space!

I am also looking at the AEM o2 UEGO as well.

What do you guys suggest?

ZXthrizzle05 03-01-2013 12:51 PM

ive read that the aem one is easier to datalog. I use it and its really simply plug and play


All times are GMT -5. The time now is 11:43 AM.


http://www.focusfanatics.com/aboutus/copyright.asp