Focus Fanatics

Focus Fanatics (
-   MK1 Focus (
-   -   What wire do I splice into to wire Morimoto angel eyes? (

focusonthefocus19 02-07-2013 08:49 PM

What wire do I splice into to wire Morimoto angel eyes?
I have a 2002 zx3. I have ordered the side emitting LED strip, and the morimoto XBLED angel eyes. I want to wire them to my parking lights, so what wire do I splice into to hook them up, and also where could I ground the two? The turn/parking lights are located in my grill.

MattDzx3 02-07-2013 10:13 PM

There are three wires going to the turn signal/parking lights in the grill, the black one is the ground. One of the others is for the turn signal and the other is for the parking light. They're both the same color but its pretty easy to test to see which is which, then just splice into the ground and the parking light wire. If you splice in but keep the wire connected to the grill light, those ones will at the same time as your LEDs, if you cut it then you will only have LEDs for parking lights. Hope this helps.

calebstubstad 02-07-2013 10:54 PM

I cut the middle wire to kill the parking lights. so, wire the angle eyes/strips to the middle wire of the three sticking out the bulb in the turn signal in the grille. I'd say see if you can wire it so the side strip blinks with the turn signal, so you could just kill the grille lights all together. that's how i'd do it lol. but for always on, it's the middle wire, green i believe but don't quote me

All times are GMT -5. The time now is 02:51 PM.