Ford Focus Forum, Ford Focus ST Forum, Ford Focus RS Forum

Ford Focus Forum, Ford Focus ST Forum, Ford Focus RS Forum (http://www.focusfanatics.com/forum/index.php)
-   MK2 Focus (http://www.focusfanatics.com/forum/forumdisplay.php?f=120)
-   -   Can anyone guess what this is? (http://www.focusfanatics.com/forum/showthread.php?t=308325)

Justinr666 02-03-2013 09:54 PM

Can anyone guess what this is?
 
http://i158.photobucket.com/albums/t...psad2d8f0a.jpg
http://i158.photobucket.com/albums/t...psc628242d.jpg
http://i158.photobucket.com/albums/t...psb367bf39.jpg
http://i158.photobucket.com/albums/t...psaa536da3.jpg

Any ideas? Should be an easy one ;)[neener]

isaac_in_tx 02-03-2013 10:27 PM

does it go inside or outside?

Justinr666 02-03-2013 10:31 PM

Inside... everyone has one of our gen focus

5characters 02-03-2013 10:35 PM

The thing around the radio display?

Justinr666 02-03-2013 10:38 PM

yes sir, exactly what it is.. just i have grinded and sanded it down so its smooth and looks uniform

5characters 02-03-2013 10:46 PM

May I ask what your plans are?

Justinr666 02-03-2013 10:58 PM

Just to paint it gloss back, was thinking metalic blue.. but decided against it. Hopefully it turns out how i picture it in my mind

RAF_S197 02-03-2013 11:28 PM

The inside of a 2008-2011 radio display on the center of the dash

nickstewartroc 02-04-2013 07:48 AM

I've wanted to do something similar with a lot of the surfaces like that, how hard was it to sand time/how long?

Justinr666 02-05-2013 01:22 PM

Quote:

Originally Posted by nickstewartroc (Post 4571857)
I've wanted to do something similar with a lot of the surfaces like that, how hard was it to sand time/how long?

Sanding the top(picture one) isnt hard.. i used a 60 grit 3M sanding sponge. The hard parts were sanding the front.. so that the lines were gone and it was even. I had to use a dremel drill type tool, with little sanding drums and sanding discs to grind down the plastic


All times are GMT -5. The time now is 03:41 PM.