Focus Fanatics

Focus Fanatics (
-   Wheels & Tires - Sponsored By Tire Rack (
-   -   need help finding bolt patter adapters!!!!! (

ToreadorFocus 01-28-2013 08:04 PM

need help finding bolt patter adapters!!!!!
lookin to go from 4x114.3 to 5x120.7 someone please help i cant find anything

Buickboy 01-28-2013 08:59 PM

These guys seem to have them but that's probably a terrible idea seeing as they are 2"

Are these going on a Focus? If so you have a 4x108 bolt pattern

ToreadorFocus 01-28-2013 09:11 PM

wow i feel stupid hahahaha i new that my bad

ToreadorFocus 01-28-2013 09:17 PM

still not havin luck finding 4x108 to 5x120.7

xxMichaelAnthony 01-28-2013 09:18 PM

Go to a machine shop and have them drill your drums and hubs.

ToreadorFocus 01-30-2013 12:24 AM

wat do u mean drill my drums and hubs

xxMichaelAnthony 01-30-2013 01:43 AM

They can drill a second bolt pattern and put studs in like so

bluebullet 01-30-2013 02:59 AM


Originally Posted by xxMichaelAnthony (Post 4564354)
They can drill a second bolt pattern and put studs in like so

Never thought about that! I was looking at buying adapters

Sent from jeremy's iPhone using FF Mobile

xxMichaelAnthony 01-30-2013 03:08 AM

There is a few people on her who have done it. HTP offered it as a service when they were around.

Nickgt40 01-30-2013 09:06 AM

A 4 lug pattern to 5 lug pattern adapter will be a minimum of 35mm thick as it has to be a two piece unit.

Also, you'll likely have to change out your wheel studs to shorter units, because the stock ones could come into contact with the outer piece of the adapter.

Adaptec Speedware can do it, but plan to give them ~$400.

What BMW/Chevy wheels are you trying to fit? Most don't exactly have favorable offsets for a focus because they are set up for RWD not FWD.

All times are GMT -5. The time now is 05:26 AM.