Focus Fanatics

Focus Fanatics (http://www.focusfanatics.com/forum/index.php)
-   Archive (http://www.focusfanatics.com/forum/forumdisplay.php?f=103)
-   -   For Sale: Trunk and hatch LED conversion kits (http://www.focusfanatics.com/forum/showthread.php?t=306744)

VonKrause 01-16-2013 12:12 PM

For Sale: Trunk and hatch LED conversion kits
 
Are you looking for that extra little bit of flair? Or trying to get an even light source in your trunk so you aren't fumbling around with the terrible stock light? Then check this out, I make conversion kits that turn your stock bulb into a string of LEDs that throw light evenly across your entire trunk or hatch area. I use high intensity, wide beam LED bricks that are premeasured and prewired to fit into your focus' trunk or hatch. The entire kit is plug and play and the LEDs come with double sided tape for easy installation.

I normally keep red, blue, and white LEDs in stock and can normally get a kit made and shipped within 2 days after payment. I can also do kits in amber or green within a weeks time. If there is a specific color you are looking for I can setup custom colors with an additional cost depending on the color.

Visiting or passing through the Houston area and want to get some custom work done? Then let me know ahead of time and I can do many other LED projects from interior lighting to accent lighting outside.

Estimated time for installation:
2000-2011 Trunk kits: 10-15 min
Hatch kits 15-25 min
2012+ kits 20-30 min (Not plug and play)

--------------------------------------------------

Kits available for order

2000-2011 trunk kit $35

Zx3-Zx5 hatch kit $35

SVT custom 4 LED hatch kit $35

SVT 3 LED hatch kit $30

2012 trunk kit $35
Not plug and play Includes hardware to splice into stock bulb

2012 hatch kit $30/$35
Not plug and play Includes hardware to splice into stock bulb
$30 price is for no sub and two light mounts in hatch area


Ready to ship Amber trunk kit $20 free shipping!


All kits are Plug and Play with the exception of the 2012 trunk and hatch kits.

PM me for info or orders

Shipping

I am currently only taking paypal
I am located in Houston, TX
Ships through USPS
Will ship anywhere in US including Hawaii and Alaska

Cost $3.00

--------------------------------------------------

Pictures

http://i533.photobucket.com/albums/e...e/WhiteLED.jpg

White Trunk kit

http://i533.photobucket.com/albums/e...ale/RedLED.jpg

Red Trunk kit

http://i533.photobucket.com/albums/e...20sale/005.jpg

Blue Trunk kit

http://i533.photobucket.com/albums/e...Woodtrunk1.jpg

Blue Trunk kit

http://i533.photobucket.com/albums/e...e/IMAG0054.jpg

Blue Custom 4 Brick SVT hatch kit

http://i533.photobucket.com/albums/e...e/WhiteSVT.jpg

White Custom 4 Brick SVT hatch kit

http://i533.photobucket.com/albums/e...ps1474b591.jpg

White Hatch kit

http://i533.photobucket.com/albums/e...x3redhatch.jpg

Red Hatch kit

http://i533.photobucket.com/albums/e...hHatchkits.jpg

http://i533.photobucket.com/albums/e...e/P4050475.jpg


--------------------------------------------------


Custom Work


http://i533.photobucket.com/albums/e...onsoleLEDs.jpg

Center console lighting

http://i533.photobucket.com/albums/e...e/LEDgrill.jpg

Front Grille accent lighting

http://i533.photobucket.com/albums/e...psb12db430.jpg

Foot well lighting

http://i533.photobucket.com/albums/e...e/Wireless.jpg

I can also wire up multiple strands/colors and have it set to a wireless switch.


-VonKrause-

VonKrause 01-21-2013 08:33 AM

Little bump

SVT513 01-21-2013 11:07 AM

I have a 02 SVT and would love to do this to my hatch. Few questions though: what is the difference between the 3 and 4 LED sets? Do you have any side by sides of the 2? Where are they mounted? Finally, what is the power source for this?



Thank you!

VonKrause 01-21-2013 12:38 PM

I have yet to sell the 3 setup, but there are a couple setups we can do, one on the left side behind the sub and then two on the right side. OR all three on the right side.

They mount under the plastic moldings that are on either side, they mount using double sided tape on the back of the LED bricks.

The power source is the outlet for the stock bulb. There are a couple things you can do, I have the adapter that plugs right into the bulb socket so all you have to do is remove the bulb and insert the wire plug, or you can splice into the bulb wire and place an LED wedge into the socket for more light. Both ways are pretty simple and don't require adding or modifying much.

SVT513 01-22-2013 12:31 AM

Awesome thanks for the info!

So basically, I could share the little light/bulb that is in the my hatch by the sub? Can I see the wedge that you will be using?

SvviftSVT 01-22-2013 11:45 AM

Justin... if you need help with a stock svt sub set up for pics, let me know.. since i modded mine to fit the 10"

VonKrause 01-22-2013 12:20 PM

http://i533.photobucket.com/albums/e...sale/photo.jpg

This is the plug (Without the wire in it) that plugs into the lamp socket

http://i533.photobucket.com/albums/e...nlinecrimp.jpg

This is the splicing way that I like to use.




Quote:

Originally Posted by SvviftSVT (Post 4551329)
Justin... if you need help with a stock svt sub set up for pics, let me know.. since i modded mine to fit the 10"

Might have to take you up on that, sometime this weekend perhaps. I also have to install my new flex pipe so if you want to make it a mini meet/install meet I would be game.

SvviftSVT 01-22-2013 12:30 PM

i can try. Amber is wanting my time. lol. but i will see what i can do.

RonMaiden 01-22-2013 12:47 PM

What's involved with the 2102 versions? Simple splicing?

I am very interested with tax time coming and this mod will come right after I do the headlamp and tail bulbs.

SvviftSVT 01-22-2013 12:53 PM

yeah it should be a simple splice into the hatch light.


All times are GMT -5. The time now is 06:55 PM.


http://www.focusfanatics.com/aboutus/copyright.asp