Focus Fanatics

Focus Fanatics (http://www.focusfanatics.com/forum/index.php)
-   ZETEC Performance (2000-2004) (http://www.focusfanatics.com/forum/forumdisplay.php?f=39)
-   -   Catalytic converter (http://www.focusfanatics.com/forum/showthread.php?t=306553)

rbianca87 01-14-2013 09:15 AM

Catalytic converter
 
I have a 2000 focus se 2.0l d.o.h..c vin 3. I am looking fot a catalytic convertet that is carb compliant and direct fit. Does anyone know where online I could find one and what the part number is? And I also need the flex pipe fter the cat. Im reall hing a hard time finding these the descriptions make it imposible to knowfor sure when shopping online.and ladt but not least I need to know wht gaskets I will need.please help!

rbianca87 01-14-2013 09:55 AM

I forgot to add that its an auto Trans.

zetecDon 01-14-2013 03:59 PM

www.Rockauto.com will have all you need. Click on the website, then click on FORD, then 2000, then Focus, then exhaust, then catalytic converter. After you have gone through that process if you are just looking to replace it with something similar I would recommend the EASTERN CATALYTIC Part # 30397 from their site. It is reasonably priced and comes with both gaskets that you will need. To get the flex pipe, go about the same process but you will need to select pipe on the last part. Then you can choose from that list. Another way you can do this is just go to your local autoparts store and tell them what you need. They more than likely carry this stuff on hand or can have it ordered in within a few days.

rbianca87 01-14-2013 04:06 PM

Quote:

Originally Posted by zetecDon (Post 4539268)
www.Rockauto.com will have all you need. Click on the website, then click on FORD, then 2000, then Focus, then exhaust, then catalytic converter. After you have gone through that process if you are just looking to replace it with something similar I would recommend the EASTERN CATALYTIC Part # 30397 from their site. It is reasonably priced and comes with both gaskets that you will need. To get the flex pipe, go about the same process but you will need to select pipe on the last part. Then you can choose from that list. Another way you can do this is just go to your local autoparts store and tell them what you need. They more than likely carry this stuff on hand or can have it ordered in within a few days.

thank you! that was a huge help i really appreciate it!

zetecDon 01-15-2013 06:02 PM

You're welcome.

homelessmonkey 02-13-2013 09:26 AM

magnaflow part # 25202 youll need header to cat gasket and cat to flex

rbianca87 02-13-2013 10:25 AM

Thats cat isnt carb compliant

saughon 02-13-2013 11:58 AM

the one that homlessmonkey posted is around 235 which is cheap for the direct fit

homelessmonkey 02-13-2013 10:07 PM

sry i didn't see carb compliant https://www.catalyticconvertersonlin...nverter-104952. its one for cali so it should be good


All times are GMT -5. The time now is 02:35 AM.


http://www.focusfanatics.com/aboutus/copyright.asp