Focus Fanatics

Focus Fanatics (http://www.focusfanatics.com/forum/index.php)
-   Focus-Power Tuning (http://www.focusfanatics.com/forum/forumdisplay.php?f=72)
-   -   help with timing tensioner pulley (milled head .060) (http://www.focusfanatics.com/forum/showthread.php?t=306369)

vortechzx3 01-11-2013 12:34 PM

help with timing tensioner pulley (milled head .060)
 
i just mill my head to .60 and my timing tensioner pulley its giving me problems. did i mill too much the head? thx

whynotthinkwhynot 01-11-2013 03:36 PM

I'm going to move this to "Focus Power"'s vendor page. 1turbofocus is the most qualified to answer this question.

Thanks for posting!

vortechzx3 01-11-2013 09:43 PM

thx !!!! i need help asap

sleepyboy 01-11-2013 10:07 PM

What kind of problem are you having?

vortechzx3 01-11-2013 11:00 PM

Its not adjusting.. And its moving alot and make sounds when the car is runnin

sleepyboy 01-11-2013 11:00 PM

Have tried retensioning it? Is the pulley itself moving or just the pointer?

vortechzx3 01-11-2013 11:22 PM

The pointer

1turbofocus 01-12-2013 12:17 AM

The pointer will be all over the place why the engine is running on some cars , some hold steady

Give me a call and lets go over a few things and steps and see if I can help then if we get it working you can come back and post about what you found

Tom

sleepyboy 01-12-2013 12:24 AM

What Tom said, as long as the pulley itself isn't moving you'll probably be fine. What ever y'all find out please post what happens so it can help others.

vortechzx3 01-12-2013 09:28 AM

The pointer moving its not what bad , when the pointer moved and sound the belt loss tension and the belt jump on the sprockets..


All times are GMT -5. The time now is 12:15 PM.


http://www.focusfanatics.com/aboutus/copyright.asp