Focus Fanatics

Focus Fanatics (http://www.focusfanatics.com/forum/index.php)
-   Central Florida Motorsports (http://www.focusfanatics.com/forum/forumdisplay.php?f=82)
-   -   Poly motor/trans mounts (http://www.focusfanatics.com/forum/showthread.php?t=306264)

felixthecat 01-10-2013 07:26 AM

Poly motor/trans mounts
 
Does anyone know the durometer hardness of the vf engineering trans/pass side mounts? 70, 80, or 88 or what?

ZXthrizzle05 01-10-2013 01:10 PM

I just received the vf trans mount yesterday. Imconfused on where the metal sandwich plate goes? Maybe on the bottom so it stops the trans from touching the poly ?

cfmfocus2 01-10-2013 01:18 PM

Quote:

Originally Posted by felixthecat (Post 4533745)
Does anyone know the durometer hardness of the vf engineering trans/pass side mounts? 70, 80, or 88 or what?

The information is not listed by VF. I will see if they will release this information to us. I will ask and see what they say.

cfmfocus2 01-10-2013 01:25 PM

Quote:

Originally Posted by ZXthrizzle05 (Post 4534138)
I just received the vf trans mount yesterday. Imconfused on where the metal sandwich plate goes? Maybe on the bottom so it stops the trans from touching the poly ?

Yes , the plate does go on the bottom.

ZXthrizzle05 01-10-2013 09:55 PM

thanks William, will be installing everything I ordered from you guys on sunday

freemind 01-11-2013 06:28 AM

William rocks!

Planner 01-11-2013 06:58 AM

On that same track, I recently ordered the CFM lower torque mount with 'street' bushings. Interested in the durometer numbers for that part.

cfmfocus2 01-11-2013 08:17 AM

Quote:

Originally Posted by felixthecat (Post 4533745)
Does anyone know the durometer hardness of the vf engineering trans/pass side mounts? 70, 80, or 88 or what?

VF does not wish to disclose the durometer of their bushing. They list it on our website as having a "high durometer".

cfmfocus2 01-11-2013 08:25 AM

Our street is 68A and the race is 85A.

I used to have the VF lower engine mount on my svtf. The bushing on transmission side worked itself out twice. The cfm street lower engine mount has been working fine on my car without issues. The CFM mount uses one piece bushings on both sides while the VF uses two piece bushings on both side.

ZXthrizzle05 01-11-2013 11:56 AM

I have the cfm lower installed, I had to shave the bushing a little to clear the sub frame


All times are GMT -5. The time now is 07:50 AM.


http://www.focusfanatics.com/aboutus/copyright.asp