Ford Focus Forum, Ford Focus ST Forum, Ford Focus RS Forum

Ford Focus Forum, Ford Focus ST Forum, Ford Focus RS Forum (http://www.focusfanatics.com/forum/index.php)
-   General Technical Chat (http://www.focusfanatics.com/forum/forumdisplay.php?f=47)
-   -   Block and Cylinder Head (http://www.focusfanatics.com/forum/showthread.php?t=306229)

Lawrenceeeeee 01-09-2013 10:48 PM

Block and Cylinder Head
 
Whats up guys. Im new here. I bought a 2003 Focus Se VIN P from my buddy that was having trouble with his engine for 400$ and figured ill make a profit out of it. After buying it i read up on problems before i tore it out and found that the valve seals like to fall into the cylinder head and cause a little damage. Well this is exactly what happened with this car and the piston is blown into pieces and the cylinder head aswell as the block are destroyed. I was wondering if anyone could point me in the right direction as to of where i could buy these. I searched ebay but i dont find the right vin and when i do its the crappiest looking block ever.

If anyone could help me out it would be greatly appreciated. Thanks. [thumb]

mikebontoft 01-09-2013 11:22 PM

Welcome.

I hate to be the person that says this because I've done the same thing with other cars, but the engine makes this one a bad car to flip (because of the bad valve seat as you mentioned). ANY used engines around are snatched up and are usually at least $1200. Any blocks sold by themselves without the head probably had the same issue. My block was reusable, but I got rid of it.

eurocars 01-09-2013 11:47 PM

try car-part.com. you can usually find most any used part there

amc49 01-10-2013 12:45 PM

Expect to pay through the nose...............

Lawrenceeeeee 01-15-2013 07:56 PM

Would the 2.0 DOHC Block fit the 2.0 SOHC engine? I would believe so since the cylinder head is mainly whats different correct? If so these are way cheaper and could get my hands on this.

amc49 01-15-2013 09:15 PM

The engines are absolutely two totally different engines, nothing interchanges.


All times are GMT -5. The time now is 12:04 AM.