Ford Focus Forum, Ford Focus ST Forum

Ford Focus Forum, Ford Focus ST Forum (http://www.focusfanatics.com/forum/index.php)
-   Wheels & Tires - Sponsored By Tire Rack (http://www.focusfanatics.com/forum/forumdisplay.php?f=50)
-   -   Tire Question (http://www.focusfanatics.com/forum/showthread.php?t=306131)

2002FordFocusZX3 01-08-2013 09:53 PM

Tire Question
 
I have a 2002 ford focus zx3 with stock 15 inch rims and the stock size tires 195 60r 15 i did the aspect ratio on a couple tire sizes and i was wonder what the widest tire is that i could fit without rubbing or needing to roll my fenders i have stock suspension also i was thinking i could maybe fit 215 55R 15 tires without rubbing or little rubbing but i am not sure?

dodgeguy 01-09-2013 04:46 AM

I put 205/55/16 on and they rub occasionally, and I am not lowered. Those 215's are pretty big, and I would expect rubbing.

2002FordFocusZX3 01-09-2013 07:22 AM

Yeah I was thinking they would rub

2002FordFocusZX3 01-09-2013 07:28 AM

But how do svt rims and tires fit they are 215s

rambleon84 01-09-2013 08:42 AM

Quote:

Originally Posted by 2002FordFocusZX3 (Post 4532173)
But how do svt rims and tires fit they are 215s

I'm not sure you can even find a 215.55.15 tire anywhere (none on tirerack)

SVT wheels use a 17x7 rim where as most stock 15" wheels are 15x6, they will better accommodate that wider tire. offset will play a roll in that equation as well.

2002FordFocusZX3 01-09-2013 02:59 PM

my rims are 6.5 inches wide from the factory so i think that would help

Magus2727 01-09-2013 04:55 PM

I have 225/50 R16's Bridgestone Potenza RE960 Pole Position and it is CLOSE. And they are a PITA to get the bead to lock when putting them on the stock rim, the shop had to use high pressure unregulated air to get the tires bead to lock. I do have an aftermarket suspension. The tire rubber is about 1/4 to 1/3" away from the strut/ spring assembly. At full lock I do not rub that I have been able to see. With my after market suspension and LCR Race camber plates I actually bottom out my suspension before the tire is able to rub.

2002FordFocusZX3 01-09-2013 10:22 PM

okay cool i think 215s will fit then and i am not worried about mounting them i can do it at my school on the tire machine with no problem because i just mounted some 315 30r 17s on my buddies mustang rims and i think that would be alot harder than the 215s with a bigger side wall


All times are GMT -5. The time now is 10:14 AM.


http://www.focusfanatics.com/aboutus/copyright.asp