Focus Fanatics

Focus Fanatics (http://www.focusfanatics.com/forum/index.php)
-   SPI Performance (2000-2004) (http://www.focusfanatics.com/forum/forumdisplay.php?f=42)
-   -   PCV Elbow for SPI - Perfect Fit!! (http://www.focusfanatics.com/forum/showthread.php?t=306129)

malim 01-08-2013 09:33 PM

PCV Elbow for SPI - Perfect Fit!!
 
All Foccis eventually develop a hole in the pcv elbow. I know for Zetec, there is a direct replacement from FORD for that elbow or even aftermarket industry for that matter. However, for SPI, nobody lists a pcv elbow and it must be bought as part of the pcv hose assembly (plastic with heat shield foam).

Well, I found a perfect direct fit and just wanted to share this everyone.
Dorman #46017 is a perfect fit for this original part. You don't need to buy the whole assembly or fix it with makeshift contraption of fittings and hoses.

Just wanted to share this.

WrenchTurnerDave 01-12-2013 10:00 PM

Quote:

Originally Posted by malim (Post 4531706)
All Foccis eventually develop a hole in the pcv elbow. I know for Zetec, there is a direct replacement from FORD for that elbow or even aftermarket industry for that matter. However, for SPI, nobody lists a pcv elbow and it must be bought as part of the pcv hose assembly (plastic with heat shield foam).

Well, I found a perfect direct fit and just wanted to share this everyone.
Dorman #46017 is a perfect fit for this original part. You don't need to buy the whole assembly or fix it with makeshift contraption of fittings and hoses.

Just wanted to share this.

Nice share. You the man.

alexanduh 06-16-2013 10:15 PM

Quote:

Originally Posted by malim (Post 4531706)
All Foccis eventually develop a hole in the pcv elbow. I know for Zetec, there is a direct replacement from FORD for that elbow or even aftermarket industry for that matter. However, for SPI, nobody lists a pcv elbow and it must be bought as part of the pcv hose assembly (plastic with heat shield foam).

Well, I found a perfect direct fit and just wanted to share this everyone.
Dorman #46017 is a perfect fit for this original part. You don't need to buy the whole assembly or fix it with makeshift contraption of fittings and hoses.

Just wanted to share this.



I bought this and put it on my car a few months ago. How did you put yours on? Mine wasn't very tight so I went around it a few times with some black electrical tape. It works excellent though.

Thanks for sharing this, btw.


All times are GMT -5. The time now is 10:45 PM.


http://www.focusfanatics.com/aboutus/copyright.asp