Focus Fanatics

Focus Fanatics (http://www.focusfanatics.com/forum/index.php)
-   General Technical Chat (http://www.focusfanatics.com/forum/forumdisplay.php?f=47)
-   -   how to know if timing belt was changed (http://www.focusfanatics.com/forum/showthread.php?t=305496)

mrdivito 01-02-2013 10:02 AM

how to know if timing belt was changed
 
is there a way to tell if the timing belt and pullys have been changed? the previous owner didnt tell me anything about it. im at 108k and if it hasnt been changed im gonna get to it asap. [dunno]

pasta 01-02-2013 03:34 PM

not really and you should do it just to know it was done get the parts from tousleyford

FLYLOW 01-02-2013 09:36 PM

No way of knowing even if the belt looks new from the outside it can be all cracked and stretched on the inside, trust me it happened to me.

Call the dealer where the car was serviced and they might tell u. Thats what i did. Car fax showed what ford dealer the prev owner took it to, i called and asked, they told me all the service record of the car

*Z3R0* 01-04-2013 06:34 AM

Yup the guys are right, rather just replace it or find out where the car was serviced and they can check if it was changed or not. I am on 161 000km now and changed mine too, the new belt is very solid and you could see wear and tear on it after i had removed it.

Dont take a chance dude, rather change it!

sleepyboy 01-04-2013 06:35 AM

When in doubt, change it out.

amc49 01-07-2013 01:30 AM

If the car miles are up there then look closely at the pulley plastic and spin them. The plastic often starts fine cracking around bearing perimeter to break into pieces at higher mileages.

FLYLOW 01-07-2013 11:30 AM

Mine looked really good from the top... But look how it looked underneath when mat and i took it out

http://i87.photobucket.com/albums/k1...E9AB6F5108.jpg

Serp belt looked even better lol

http://i87.photobucket.com/albums/k1...EB432342A9.jpg

sleepyboy 01-08-2013 02:15 AM

Here is another local member's belt we changed out and it only had 65k mi on it.

http://i7.photobucket.com/albums/y25...2-08154439.jpg

http://i7.photobucket.com/albums/y25...2-08154451.jpg

http://i7.photobucket.com/albums/y25...2-08154853.jpg



Like I said, when in doubt change it out.

zetecDon 01-09-2013 02:32 AM

Moved to "General Technical Chat".

amc49 01-09-2013 04:31 PM

The teeth can look rough like that after five minutes of normal use. Meaning diagnosis looking at teeth alone is very often worthless. Now the edge stripping on the backside is an altogether different issue................that should not be happening.


All times are GMT -5. The time now is 12:51 AM.


http://www.focusfanatics.com/aboutus/copyright.asp