Ford Focus Forum, Ford Focus ST Forum

Ford Focus Forum, Ford Focus ST Forum (http://www.focusfanatics.com/forum/index.php)
-   MK3 Focus (http://www.focusfanatics.com/forum/forumdisplay.php?f=121)
-   -   2013 Focus SE - air deflector damage? Advice needed. (http://www.focusfanatics.com/forum/showthread.php?t=305435)

Christopher909 01-01-2013 02:11 PM

2013 Focus SE - air deflector damage? Advice needed.
 
http://oi48.tinypic.com/eumu5s.jpg

Tire tread on the highway caused front end damage. I "think" this damaged part is the air deflector. Correct? Does anyone know what the repair costs might be? 2013 SE. Thanks in advance.

http://oi48.tinypic.com/e0fwba.jpg

PS: could be part 8b384?

markwb 01-01-2013 04:58 PM

Quote:

Originally Posted by Christopher909 (Post 4520675)
Tire tread on the highway caused front end damage.

Not understanding this. You can probably get that part on line and replace it yourself much cheaper than auto collision center. It probably is held in place with the split rivet or push pin type fasteners.

jdetzel 01-01-2013 09:39 PM

That illustration looks like a Fusion front bumper so that is probably not the correct part number.
Check this that was posted a few days ago.
http://www.focusfanatics.com/forum/showthread.php?t=305084

suss6052 01-01-2013 09:51 PM

Quote:

Originally Posted by jdetzel (Post 4521098)
That illustration looks like a Fusion front bumper so that is probably not the correct part number.
Check this that was posted a few days ago.
http://www.focusfanatics.com/forum/showthread.php?t=305084

That diagram posted is a 2012+ Focus, but the picture is of the Focus Electric. The notches around the headlamps say Focus not Fusion.

suss6052 01-01-2013 09:53 PM

Quote:

Originally Posted by Christopher909 (Post 4520675)
http://oi48.tinypic.com/eumu5s.jpg

Tire tread on the highway caused front end damage. I "think" this damaged part is the air deflector. Correct? Does anyone know what the repair costs might be? 2013 SE. Thanks in advance.

http://oi48.tinypic.com/e0fwba.jpg

PS: could be part 8b384?

The corner piece is 17626 on the lh side, probably the same on the other side, the 8b384 is the center piece underneath.

jdetzel 01-01-2013 10:22 PM

I see the difference but did you mean the diagram is a Focus electric and the picture is a 2012+?
The photo shows the the bulge for the fog lamp opening and the lack of the two horizontal ridges that start just at the front of the wheel lip.

suss6052 01-01-2013 10:25 PM

Quote:

Originally Posted by jdetzel (Post 4521164)
I see the difference but did you mean the diagram is a Focus electric and the picture is a 2012+?
The photo shows the the bulge for the fog lamp opening and the lack of the two horizontal ridges that start just at the front of the wheel lip.

Yes, the diagram is of a 2012+ Focus electric as opposed to the standard model, but the cut line for the headlamps are the exact same, so is many of the details such as the lower panels.

zetecDon 01-01-2013 11:10 PM

Moved to "MK3 Focus" because this is a model specific question.

jdetzel 01-02-2013 08:23 AM

Quote:

Originally Posted by suss6052 (Post 4521167)
Yes, the diagram is of a 2012+ Focus electric as opposed to the standard model, but the cut line for the headlamps are the exact same, so is many of the details such as the lower panels.

The diagram is a 2012+ Focus electric and is NOT the diagram for the bumper of the vehicle in the picture.
While the parts may be similar they may or may not work on the vehicle in the picture.
I do not see how advising someone that the part is probably the same is being helpful.

suss6052 01-02-2013 08:42 AM

Quote:

Originally Posted by jdetzel (Post 4521443)
The diagram is a 2012+ Focus electric and is NOT the diagram for the bumper of the vehicle in the picture.
While the parts may be similar they may or may not work on the vehicle in the picture.
I do not see how advising someone that the part is probably the same is being helpful.

It is the same part as shown in the proper diagram. Just because the rest of the picture might not match doesn't mean I haven't looked at the correct diagram, which calls out the same part base number and looks the same.


https://lh6.googleusercontent.com/-j...mper_cover.jpg


All times are GMT -5. The time now is 02:33 PM.