Focus Fanatics

Focus Fanatics (http://www.focusfanatics.com/forum/index.php)
-   SVT Performance (2002-2004) (http://www.focusfanatics.com/forum/forumdisplay.php?f=40)
-   -   Intake manifold gasket question (http://www.focusfanatics.com/forum/showthread.php?t=305317)

anarchyamp 12-30-2012 03:23 PM

Intake manifold gasket question
 
This is a stupid question but where do these go?? http://focus.c-f-m.com/fel-pro-intak...svt-st170.aspx

Magus2727 12-30-2012 05:24 PM

The manifold should have groves at each runner that interfaces with the head.

anarchyamp 12-30-2012 05:39 PM

Quote:

Originally Posted by Magus2727 (Post 4518426)
The manifold should have groves at each runner that interfaces with the head.

What do you mean by this? The top piece of the manifold bolts to the head and I took that off and it had weird kinda tear drop shaped gaskets that were NOT these. They were between the intake manifold and the head.

I also checked where the 4 black couplers connect the top of the intake manifold to the bottom of it and found no gaskets there, just the couplers and clamps.

Perhaps these 4 circle gaskets go further down in the boxy part of the manifold? I don't know...

DEMENTED SVTF 12-30-2012 10:11 PM

Those tear drop gaskets used to be round like rubber bands. Take a small flat head screw driver remove the old tear shaped ones. Just work the new bands into the lower intake channel

anarchyamp 01-07-2013 08:44 PM

Wow, didn't seem it like it but that's crazy. So then either these http://focus.c-f-m.com/fel-pro-intak...svt-st170.aspx or these http://focus.c-f-m.com/fordintakeman...t17002-04.aspx go here....

http://i1105.photobucket.com/albums/...ps52a295aa.jpg


All times are GMT -5. The time now is 11:20 AM.


http://www.focusfanatics.com/aboutus/copyright.asp