Foglight installation help?
 

So i have a 2000 ZTS that doesnt have fog lights and id like to have some but i dont really know how. The bottom grill doesnt have the cutouts for the lights and the headlight switch inside is not the right one for foglights. So i guess my question is can i cut the pre existing grill to make the holes or do i have to get a new one, also should i go to junk yard to get parts or try and have a dealer install them?

I just bought some aftermarket universal ones, and put them right behind my lower grille on my 2003. The performance is the same (if not a little better) and it looks really cool behind the grille like that. I wired them to their own switch.

There is a eBay plug and play fit for the ford factory fog lights. Bought it myself haven't installed it yet though

Sent from my HTC VLE_U using FF Mobile

http://www.ebay.com/itm/2000-2004-Fo...b7b828&vxp=mtr

i bought this kit, it rules. i have the same year as you, and it was a 2 hour easy as pie installation. i recommend, it, as I had never done any wiring before and got it the first try. the company is super quick to help too

[welcome] to FF [ffrocks]

Some Foci have the foglight pigtails already. Look behind your lower grille to see if there is any extra wiring hanging there, then all you would need is the headlight switch, grille for fogs and fogs.

If you don't want to buy that $89 ebay kit and would rather try to piece it together yourself for cheaper look here:

http://www.focusfanatics.com/forum/showthread.php?t=229873

Although, I don't think you can piece it together for cheaper than $89. That eBay kit is a good deal!

So I think I'm going to get the eBay kit hope it works, wish me luck

I paid about the $89 from rock auto and got stock fogs with stock grill. but I have the wiring there. I still needed a relay and headlight switch(which I already got)

Update:
the ones from rockauto turned out didn't come with the mount/adjuster bracket. Ford wants to sell the mounts as all seperate pieces for about $80 (brackets/screws/springs)

Got a set from JY off car-parts for $70 with bulbs shiped

So mine does have the pig tails already there and put in the new headlight switch and plugged the lights into the pigtails and it didn't work. What am I missing?

Probably need the fuses also



Sent from jeremy's iPhone using FF Mobile

You'll need a fuse, it goes in the engine bay fuse box if I'm not mistaken. Just figure out what type of fuse it is (I can't remember), and go to our local napa/ auto zone/ advanced and they'll have it, I believe it was about $8.50 total.