Ford Focus Forum, Ford Focus ST Forum, Ford Focus RS Forum

Ford Focus Forum, Ford Focus ST Forum, Ford Focus RS Forum (http://www.focusfanatics.com/forum/index.php)
-   General Forced Induction (http://www.focusfanatics.com/forum/forumdisplay.php?f=44)
-   -   Jrsc bbk pulley size (http://www.focusfanatics.com/forum/showthread.php?t=304799)

Boo5ted 12-21-2012 03:29 PM

Jrsc bbk pulley size
 
Hey guys I'm about to pick up a Jackson racing supercharger kit with the bbk but the pulley it bad. What size is the pulley and where can I get one. Jackson supercharges website has nothing for the focus anymore.

Thanks

Jarhead2112 01-01-2014 07:16 PM

I need one as well. Let me know if you find one please

Fierceintent 01-01-2014 11:30 PM

Your best bet is ebay. I saw a few on there that were new. They were like a quarter inch or 1/2 inch bigger(diameter).

jwill2489 01-02-2014 01:08 AM

I believe the bbk pulley is 3 inch. Pulley boys makes them

SVTF 03 01-02-2014 01:07 PM

^^ Yep. $80 on the website. - http://www.pulleyboys.com/store/prod...0&cat=7&page=1

Jarhead2112 01-02-2014 06:45 PM

I have mine but its chewed up. Its marked SVTF and the groove diameter is 2.95. I need to find out if I am measuring it correctly. I am sure the one I took off is for the BBK. Its just a little chewed up and I would rather replace it with new. Belt suggestions? I believe i will need a 105.5 with this pulley. Any input is appreciated. Probably should have posted this in FI but I am a newb. Thanks.

jwill2489 01-02-2014 09:56 PM

2.95 is the size.

i used this belt from napa, i had to special order mine. was about $40 i think

Gates V-Line Belt
106 3/8
25-061058 HD

zetecDon 01-04-2014 07:47 PM

Moved to "General Forced Induction".


All times are GMT -5. The time now is 06:13 PM.