Ford Focus Forum, Ford Focus ST Forum

Ford Focus Forum, Ford Focus ST Forum (http://www.focusfanatics.com/forum/index.php)
-   Focus-Power Tuning (http://www.focusfanatics.com/forum/forumdisplay.php?f=72)
-   -   Tuning help (turbo svt focus) (http://www.focusfanatics.com/forum/showthread.php?t=304568)

03svtdawg 12-17-2012 05:21 PM

Tuning help (turbo svt focus)
 
I have an 03 svt focus with a turbonetics t3/t4, diablo mafia, diablo sport tuner (currently running one of toms old tunes with around 300 whp), boost-a-pump, knock sensor, and alot of typical turbo needed parts.

What im trying to figure out is its not easy for me to drive to North carolina again to have my car dyno'd so what im wondering is if anyone in ga can tune it or is there something speacial i need to know if taking the car to someone else.

The reason for needing the tune. A couple of years ago tom rebuilt this motor put a new fuel pump on it tuned it and gave it back to me. There was an issue tuning it with the new fuel pump he put on it and i picked it up before he had time to figure it out so the car was dropping off bad at almost redline.
I drove it for about a month when I ran into the big number 3 piston isssue lol. So yea number three piston busted up bad and I'm having a mechanic fix it now. All i need to figure out is the tuning issue. any advice will be awesome! thanks

focusmaniaczx3 12-17-2012 07:08 PM

why not have tom tune it by datalogging?

1turbofocus 12-17-2012 08:05 PM

Give me a call 704-249-3745 I can tune it with out bringing it to me

Tom

03svtdawg 12-17-2012 09:02 PM

Ok ill call you when I get the car back from the mechanic.

03svtdawg 12-21-2012 11:06 AM

So today I found out how much the mechanic here is gonna charge to fix the piston blow out. 2000 dollars to pull the motor fix it and put it back together. Seems high maybe I'm wrong.

focusmaniaczx3 12-21-2012 05:27 PM

i think tom charges about $1500 for an engine rebuild but that isnt pulling and reinstalling. that is with you showing up with the motor in the back of a truck and then picking it up when he is done. HOWEVER tom has been doing builds on the focus platform since 2002 i think so from an experience standpoint he has a leg up on just about anyone out there and then there is the peace of mind knowing that the job got done right....

ZXthrizzle05 12-22-2012 10:03 PM

if you lived near Washington id build your zetec

700whpfocus 01-05-2013 04:47 PM

i've got a zx3 block already honed for 9:1 compression probe pisto\ns and svt rings.....if u r curious. i may sell

03svtdawg 01-05-2013 04:59 PM

How much I'm intreaged.

ZXthrizzle05 01-05-2013 05:37 PM

make sure you take this to PM and if you decide to sell and make a transaction make a thread for it. its our way of keeping track of transactions and having insurance for whatever reason if someone does not pull through for a deal


All times are GMT -5. The time now is 12:37 AM.