Ford Focus Forum, Ford Focus ST Forum

Ford Focus Forum, Ford Focus ST Forum (http://www.focusfanatics.com/forum/index.php)
-   Ford Focus & General Car Chat (http://www.focusfanatics.com/forum/forumdisplay.php?f=38)
-   -   because 70mm turbo... (http://www.focusfanatics.com/forum/showthread.php?t=304163)

DJslurp1200 12-11-2012 09:40 PM

because 70mm turbo...
 
ya uh... just bought the front facing single 70mm turbocharger kit for my 2v gt.... :)

DJslurp1200 12-11-2012 09:42 PM

http://on3performance.com/TwoV2ndGenFF.aspx

incase anyone was wondering what kit...

iminhell 12-11-2012 10:39 PM

Never heard of them. But looking a little ... good luck.

DJslurp1200 12-11-2012 10:42 PM

Quote:

Originally Posted by iminhell (Post 4494257)
Never heard of them. But looking a little ... good luck.

ya you wouldnt... its not quite of a household name as say hellion, or what not... they only make kits for mustangs and just recently started making kits for the new camaros. but alot of guys on the mustang forums run these kits with no complaints. so far they have proven to be reliable.

DJslurp1200 12-11-2012 10:43 PM

bigass turbo + v8 FTW!!!

goinloco1 12-11-2012 11:44 PM

I notice they never say what their kit was putting down for HP and never really give any clear numbers on anything. that should send up flares in all directions.

OK dude... 2200 bucks? thats ebay cheap crap there. treat your pony better than that.
I frequent alot of mustang forums and have never heard of this company.

wouldn't cheap out like that on mine

IH84DZ 12-12-2012 08:29 AM

On3 kits are well built but use a cheap turbo. It's cheap power and it's pretty much a must to get beyond 400 wheel in a 2v 4.6. I know several folks who have used them without issue.

Certainly nicer than most of what you'll find on the turbo honda's in your area.

iminhell 12-12-2012 05:49 PM

Who makes the turbo?
Is there even a name on it?

Journal bearing? With water cooling?

goinloco1 12-12-2012 08:21 PM

from reading more they also dont come with injectors, pump. tuning, etc. and there was something about needing a tubular "k" member too to clear components.
otherwise enjoy th 300 somethimg hp w/o fuel upgrades... and you still have to fork over for tune time yet.
this cheap kit isn't sounding so cheap anymore...k member, fuel pump, injectors, tuning unit, custom dyno tune, upgrade to good turbo

StockTalon 12-12-2012 08:28 PM

Have fun making the On 3 kit fit properly and, I hope the knock off TiAL valves and Masterpower turbo hold together for you.


All times are GMT -5. The time now is 10:54 AM.