Focus Fanatics

Focus Fanatics (http://www.focusfanatics.com/forum/index.php)
-   Extreme Dimensions, Inc (http://www.focusfanatics.com/forum/forumdisplay.php?f=113)
-   -   Exterior mods (http://www.focusfanatics.com/forum/showthread.php?t=303914)

Keno1bob 12-07-2012 10:23 PM

Exterior mods
 
Looking for some ideas on exterior mods.
I jus got done smoking the tail lights n side markers.
8K HID are next on the list.
Akita rims with calipers that match the paint.
Up for any ideas

katiekay 12-23-2012 07:20 PM

[welcome] to FF [ffrocks]

Are you doing a projector retrofit?

As far as body mods for a 1.5 gen sedan, I would get the SAP rear bumper, SVT front bumper, 00-04 fenders, 00 - 04 OEM CF hood, SVT sideskirts, SAP spoiler, & Mach HID headlights. It would be 100% OEM+ and you would have the baddest sedan around.

Keno1bob 12-23-2012 07:32 PM

where can i look for these?

katiekay 12-23-2012 08:00 PM

Quote:

Originally Posted by Keno1bob (Post 4510163)
where can i look for these?

Check the BST section often as well as Craigslist junk yards, etc. Sorry that Extreme Dimensions didn't get back to you, but OEM is the way to go!

You can get the OEM 00-04 fenders from rockauto for about $30.00 each. There always seems to be SVT sideskirts in the BST, there is an SAP spoiler in the BST now same with the SVT bumper, dunno if they sold yet. There are a few sets of Machs in the BST also.

Aside from rockauto, check with Steve at Tousley ford, he might be able to get an SAP rear or some other parts you need for the 00-04 front end conversion. Also check eBay for SAP/SVT parts. To build the car that I posted earlier will take some searching to get, but you should be able to get it all for around $1,500. I know of a few places that sell OEM CF hoods, but I wont post them here, if you want to know more, PM me:)

BST section:
http://www.focusfanatics.com/forum/f...splay.php?f=30

Exterior mods section:
http://www.focusfanatics.com/forum/f...splay.php?f=24

I would love to see this car if you do it right!!!!!!

katiekay 12-23-2012 08:09 PM

This front end with thos HID headlights and either that hood or the CF one lol:
http://static.cargurus.com/images/si...473391978.jpeg

These sideskirts:
http://i158.photobucket.com/albums/t.../Photo0580.jpg

This rear(including spoiler:
http://members.focusfanatics.com/alb...ocus_SAP-2.jpg

felixthecat 12-23-2012 11:36 PM

I have the sap rear bumper & the ww skirts. At the time I couldn't find a desent set of svt skirts. Seems like its hit or miss w/ those. I kept my stock front bumper= my car is lowered & I don't have any scrapping issues.

WyoJames 12-24-2012 05:49 PM

Quote:

Originally Posted by pyroinsa (Post 4510152)
[welcome] to FF [ffrocks]

Are you doing a projector retrofit?

As far as body mods for a 1.5 gen sedan, I would get the SAP rear bumper, SVT front bumper, 00-04 fenders, 00 - 04 OEM CF hood, SVT sideskirts, SAP spoiler, & Mach HID headlights. It would be 100% OEM+ and you would have the baddest sedan around.

Not intending to thread jack and sorry for the newb question. But just to make sure...A 1st gen SVT bumper will fit a 1.5 gen sedan?

sam fisher 12-24-2012 05:52 PM

Quote:

Originally Posted by WyoJames (Post 4511364)
Not intending to thread jack and sorry for the newb question. But just to make sure...A 1st gen SVT bumper will fit a 1.5 gen sedan?

Dont think so

Sent from my SPH-D710BST using FF Mobile

katiekay 12-24-2012 06:21 PM

Quote:

Originally Posted by WyoJames (Post 4511364)
Not intending to thread jack and sorry for the newb question. But just to make sure...A 1st gen SVT bumper will fit a 1.5 gen sedan?

yes it will, as long as you get the hood, fenders and headlights. All the stuff I already said

WyoJames 12-24-2012 07:56 PM

Quote:

Originally Posted by pyroinsa (Post 4511393)
yes it will, as long as you get the hood, fenders and headlights. All the stuff I already said

Ok cool. Thanks!


All times are GMT -5. The time now is 05:21 AM.


http://www.focusfanatics.com/aboutus/copyright.asp